Audio Technica BPHS1
Broadcast Stereo Headset
Product Code:
BPHS1
Features
• Microphone features polar pattern tailored for natural sound
• Highly intelligible vocal reproduction
• Closed-back
circumaural ear cups help seal out crowd noise
• Neodymium magnets in
microphone and headphones
• Rugged design with user-replaceable cable and
ear pads
• Cable termination: 3-pin XLRM-type connector for mic & 1/4”
for headphones
Created especially for on-air news & sports
broadcasting, announcing & interviews, this rugged stereo headset offers
natural, highly intelligible and focused vocal reproduction, closed-back
circumaural (around-the-ear) ear cups to seal out background noise, and a
high-output dynamic microphone mounted on a flexible gooseneck boom.
The
headset’s microphone has a cardioid polar pattern tailored for pickup of speech
with maximum voice intelligibility over a wide range of frequencies. It is more
sensitive to sound originating directly in front of the element, making it
useful in reducing pickup of unwanted sounds. The flexible gooseneck boom
swivels for easy positioning on either the right or left side. |
Type
|
Closed-back Dynamic (Headphone)
Cardioid Dynamic (Microphone) |
| Driver Diameter |
40 mm (Headphone) |
| Magnet |
Neodymium (Headphone) |
| Voice Coil |
Copper-clad aluminum wire |
| Frequency Response |
20-20,000 Hz (Headphone)
40-20,000 Hz
(Microphone) |
| Maximum Input Power |
1,600 mW at 1 kHz |
| Sensitivity |
100 dB (Headphone)
-57 dB (1.4 mV) re
1V at 1 Pa (Microphone) |
| Impedance |
65 ohms (Headphone)
560 ohms
(Microphone) |
| Weight |
264 g (9.3 oz) |
| Dimensions |
82.0 mm (3.23") wide (earcup);
46.0 mm
(1.81") wide (headband);
180.1 mm (7.09") long (boom), microphone extended;
24.0 mm (0.94") diameter (microphone) |
| Cable |
3.3 m (10.8') long with 8-pin connector at
headset end; 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug
(headphone) outputs |
| Accessories Included |
3 windscreens; spare connector screw |
|
|
