Rode HS-1 Headset Microphone

RODE HS1

Headset Microphone

Home  |  Azden  | Zoom  | Audio Tech  | Sennheiser  | Sound Devices| Tascam  |SHURE  | Yamaha  | Clear-Com  |  Sony  |  Panasonic  | Rode  |  JVC | Contactus  | Visit Us
Home > RODE > HS-1 Email usContact us

7% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall / Seletar Airport Passenger Terminal / Marina Bay Cruise Centre Singapore/ International Passenger Terminal at Harbourfront Centre GST Refund Centre before departure with goods within 2 months from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme's conditions and eligibility criteria can claim for the GST refund. Please visit: https://www.iras.gov.sg/IRASHome/GST/Consumers/Tourist-Refund-Scheme/ for GST Guide for Visitors on Tourist Refund Scheme.

 RODE HS-1 Headset Microphone Lightweight construction for complete comfort

RODE HS1 Headset Microphone
Product Code: HS1
Discontinued
review button
• Ultra discreet appearance
• Available in Pink or Black
• Omni-directional polar pattern
• Three axes of mechanical adjustment for perfect fit with malleable tube arm and headband for finer adjustment
• Lightweight construction for complete comfort
• Corrosion resistant stainless steel tube arm
• Low handling noise
• Includes Mini-furry and pop filter / windshield
• RØDE MiConTM interconnectivity system provides interface with a wide range of wireless systems

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

The RØDE HS1 headset is designed and made in Australia, and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.

The package includes
• HS1 Headset Microphone
• MiCon Cable (1.2m)
• MINIFUR-HS1 Artificial Fur Wind shield
• CLIP1 MiCon Cable Management Clip
• WS-HS1 Pop Filter / Wind Shield
• Anti-Trauma Case
• Tool Kit
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.10"
Polar Pattern Omnidirectional - picks up all sides equally
Address Type End
Frequency Range 60Hz - 18kHz
Output Impedance 3000Ω
Maximum SPL 122dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 189.0mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -47.2dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 36dB-A
Power Options +48V phantom power required from mixer or interface
Weight 6.50gm
Dimensions 65.00mmH x 180.00mmW x 200.00mmD
Output MiCon™ Output - requires MiCon™ adapter (sold separately)
Warranty 1 year with free extension to 5 years
Live Microphones
S1
M1
M1-S
M2
M3
Studio Microphones
M5
NT-USB
NT-1
NT1-A
NT-1000
NT2-A
NT-2000
NT-3
NT-4
NT-5
NT-55
NT-6
Classic II
K2
NTK
NTR
NT-SF1
Shotgun Microphones
NTG1
NTG2
NTG3
NTG4
NTG4+
NTG8
NTG5 Recording Kit
Videomic NTG
AVX Series
AVX-MKE2
AVX-ME2
AVX-835
AVX-COMBO
SK AVX-3
EKP AVX-3
SKM AVX-835
SKM AVX-835S-3
Broadcast Microphones
Broadcaster
Podcaster
Procaster
Reporter
Wearables
HS-1
Lavalier
PinMic
Video Microphones
VideoMic Me
VideoMicro
Stereo VideoMic
Stereo VideoMic Pro
Stereo VideoMic X
VideoMic
VideoMic Pro
VideoMic Go
VideoMic Me-L
iOS Microphones
i-XY (Lightning Version)
smartLav+
SC6-L
SC6-L Kit
RODELInk
Filmmaker Kit
Wireless Go
Accessories
PSM1
SM1
SM2
SM3
SM4
SM5
WS2
Dead Cat
WS6
WS7
Boompole
Boompole Bag
PSA1
SM6
Blimp
Deadcat VMP
Deadkitten
WS8
Mini Boompole
Micro Boompole

Read our blogs