SHURE
577B Installed Microphones

Homepage  |   Azden  |   Zoom  |   Sound Devices  |   Sennheiser  |   Tascam  |   Yamaha  |  JBL  | Mackie  | Audio Technica  | Rode  | SHURE  | Beyerdynamic  | Contact us
Home > SHURE > All Others > 577B  
Microphones
All Others
514B 450 Series II
503BG 512
515 Series 522
527B 561
527C 577B
562 596LB
588SDX VP64
MC50B & MC51B  WCB6
VP88 WCE6i
WCE6 WH20
WCM16 WL183/ WL184/ WL185
WH30 WL51
WL50 104C
WL93 WBH54
WBH53 El Diablo
Naked Eye Proscenium
Recordist Soundstage
SPLx Custom Studio Vocalist
810 Modulink
PG Microphones
SM Microphones
Beta Microphones
KSM Microphones
Microflex
Classic
Wireless System
Performance Gear System
PGX System
PGX Digital Wireless Systems
SLX Series
ULX Standard
ULX Professional
UHF-R-Series
Personal Monitor Systems
PSM 200
PSM 400
PSM 600
PSM 700
PSM 900
PSM 1000
Earphones & Headphones
SE Earphones
Headphones
Music + Mobile
Discussion Systems
C1-Ci
C1-Cs
C1-Di
C1-Ds
C1-PS 30s
C1-PS 60i
Mixers + Digital Signal Processors
DSP
Installed Mixers
Performance Mixers
Field + Mobile

DJ RecordNeedlz +

Hi-Fi Phono Cartridges

Record Needlz
Phono Cartridges
577B Microphone


Product Code:
577B Microphone

The Shure Model 577B Microphone is a handheld dynamic microphone designed for communications and paging applications that require highly intelligible, low noise output. It can be used in all types of mobile communications, from amateur radio to helicopter news and traffic reports. It is also suitable for public address and paging systems in noisy areas such as factories, airport terminals, and restaurants.

The 577B represents a significant improvement over most microphones with anti-noise features. Shaped frequency response, directionality, and distant sound discrimination contribute to total noise reduction. The microphone operates on the pressure-gradient principle and has two sound entry ports spaced a small distance apart.

A mounting bracket is supplied to provide convenient hang-up when the microphone is not in use.
  • 577B with built-in hangup bracket and mounting bracket

Features
  • Frequency response tailored for close-talk operation
  • Extremely effective noise cancellation
  • Dynamic microphone cartridge
  • Modular design
  • "Million-cycle" leaf-type press-to-talk switch
  • TRIPLE-FLEXc able provides three to four times the flex life of most coiled cords
  • Rugged ARMO-DUR case
  • Built-in hang-up button and supplied mounting bracket

Specifications
  • Type : Dynamic, noise-canceling
  • Frequency Response : 100 to 5,000 Hz
  • Impedance (at 1000 Hz)
    Rated at 150 ohms (175 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms.
  • Output Level (at 1,000 Hz, 5/16 in.)
    Open Circuit Voltage ... -66.0 dBV/Pa (0.5 mV)
    0 dB = 1 volt per 1 Pascal/94 dB SPL
  • Hum Sensitivity : Equivalent to 32 dB SPL in 1 millioersted field
  • Operating Temperature Range : -40 degrees to 74 degrees C (-40 degrees to 165 degrees F)
  • Switch Type : Double-pole, single-throw, leaf-type, push-to-talk
  • Cable : Non-detachable. 1.8m (6 ft), neoprene-jacketed coil cord, four-conductor (two conductors shielded).
  • Case : Two-tone gray, high-impact ARMO-DUR®
  • Dimensions : See User Guide
  • Net Weight : 330 grams (11.6 oz)

Read our blogs