Panasonic PT-LX22 | PTLX22 Portable Projector

7% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall / Seletar Airport Passenger Terminal / Marina Bay Cruise Centre Singapore/ International Passenger Terminal at Harbourfront Centre GST Refund Centre before departure with goods within 2 months from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme's conditions and eligibility criteria can claim for the GST refund. Please visit: https://www.iras.gov.sg/IRASHome/GST/Consumers/Tourist-Refund-Scheme/ for GST Guide for Visitors on Tourist Refund Scheme.

Panasonic PT-LX22 Full 2200 lm of Brightness and 500:1 Contrast Portable Projector

Product Code: PT-LX22

The PT-LX22 portable projector offer high brightness in a compact, 3.5-kg (7.7-lb) body. This model also features a wide range of functions that greatly reduce the hassle and cost of maintenance, such as a lamp replacement cycle of up-to-3,000 hours and an air filter replacement cycle of up-to-4,000 hours. A new intelligent lamp control system effectively reduces power consumption and this advanced model provides powerful visual support with superb performance while minimizing environmental impact.

Panel Size		14 mm (0.55 inches) diagonal (4:3 aspect ratio)
Display Method		Transparent LCD panel (x 3, R/G/B)
Pixels		786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lamp		230 W × 1, lamp replacement cycle (lamp power: High, Normal/Eco): 3,000 hours/4,000 hours
Brightness		2,200 lm (lamp power: High)
Contrast Ratio		500:1 (full on/full off, lamp power: High)
Resolution		1,024 × 768 pixels
Lens		1.2x manual zoom, manual focus, F 2.10-2.25, f 19.11-22.94 mm
Screen Size		0.76-7.62 m (30-300 inch)
Optical Axis Shift		6:1
Scanning Frequency	RGB	fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
	YPBPR (YCBCR)	fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
	S-Video/Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Terminals	COMPUTER IN 1 / S-VIDEO IN	D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR /S-VIDEO x 1) (The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)
	VIDEO IN	RCA pin × 1 (Composite VIDEO)
	SERIAL IN	D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
Noise Level		37.0 dB (lamp power: High), 34.1 dB (lamp power: Normal), 29.0 dB (lamp power: Eco)
Installation		Ceiling/floor, front/rear
Power Supply		100-240 V AC, 50/60 Hz
Power Consumption		287 W (0.47 W in Eco standby mode, 7.1 W in Serial standby mode.)
Dimensions (W x H x D)		349 x 105 x 247 mm (13.7" x 4.1" x 9.7") (with legs at shortest position, not including protruding parts)
Weight		Approximately 2.90 kg (6.39 lbs)
Operating Temperature		5°C-35°C (41°F-95°F)
Operating Humidity		20%-80% (no condensation)
Supplied Accessories		Power cord x 1*5, wireless remote control unit, batteries (AAA/R03/LR03 type × 2), VGA cable x 1, filter cover, software CD-ROM (Logo Transfer Software)