|
Sony
SRXR320P Projector (Discontinued)
|
| |
|
Model no.:
SRX-R320P
|
SONY SRXR320P
|
| The SRX-R320P system is a
floor standing 4K (4096 x 2160 pixel) projection system intended
for theater exhibition. The SRX-R320P model name encompasses the
entire system, not just the projector. This includes SRX-R320P
Projector Head, LMT 300 Media Block (1.7TB Storage Capacity),
STM-100 Theater Management System, Projectionist Terminal, and
Enclosure Security System. The system also includes HDSDI and DVI
inputs for alternate content. The SRX-R320P projector is equipped
with three Silicon X-tal Reflective Display (SXRD™) devices,
delivering more than four times the resolution of full HDTV (1920 x
1080), achieving a high contrast ratio of 2000:1. There are four
models of lenses available for this projector and a single lamp
system. With 4.2kW lamp, SRX-R320P achieves 14ft-L on 20-meter wide
screen.Lenses can be selected using the SRX lens calculator
available from marketing or from the SRX web site. The system is
very heavy and it is highly recommended that field service install
it. Dimensions are 27.5 inches wide, 29.9 inches tall, and 49.2
inches deep. Lamps and lens must be installed on site by qualified
installers. Lamps are shipped separately as hazardous
materials. |
|
|
General Specifications |
Detail: |
|
Weight |
429 lb (195 kg) (excluding an optional lamp and a
lens) |
|
Dimensions (W x H x D) |
27 5/8 x 25 1/4 x 49 1/4 inches (700 x 640 x 1250
mm)
(excluding a touch-panel display and projecting parts of the unit
such as a status light and a chimny) |
|
Power Requirements |
AC 200 V to 240 V, 50/60 Hz, single-phase, 27 A
to 22.5 A |
|
Power Consumption |
Max. 5.4 kW (USHIO DXL-40SRXPRO 4.2 kW lamp)
Max. 4.2 kW (3.0 kW lamp)
Max. 3.0 kW (2.0 kW lamp) |
|
Input Signal |
Media Block input (x2): 4096 x 2160 pixels
HD-SDI/Dual-link HD-SDI*: 1920 x 1080 pixels
(SMPTE-372M/SMPTE-292M/ITU-R.BT709/BTA-S004)
DC-SDI/Dual-link DC-SDI*: 2048 x 1080 pixels
12 bit/X’Y’Z’ (with Dual-link HD/DC-SDI Input
Board)
DVI-D: XGA (1024 x 768), SXGA1 (1280 x 960),
SXGA2 (1280 x 1024), SXGA+ (1400 x 1050),
UXGA (1600 x 1200), WUXGA (1920 x 1200),
HD (1920 x 1080), DC (2048 x 1080) |
|
Operating Humidity |
35% to 85% (no condensation) |
|
Operating Temperature |
41 °F to 95 °F (5 °C to 35
°C) |
|
Storage Temperature |
12 °F to 140 °F (-20 °C to +160
°C) |
|
Optical Specifications |
Detail: |
|
Projection System |
3-SXRD panel, prism color integrated
system |
|
Light Output |
21000 lumens (average, USHIO DXL-40SRXPRO 4.2 kW
lamp) |
|
Lamp |
4.2 kW Xenon lamp (x1) or 3.0 kW Xenon lamp (x1)
or 2.0 kW Xenon lamp (x1) |
|
Image Device |
SXRD, 1.55-inch (diagonal), 4096 (H) x 2160 (V)
pixels on each chip |
|
Screen Coverage |
4.5-meter (15-foot) to 22-meter (70-foot) screen
width on Scope size (USHIO DXL-40SRXPRO 4.2 kW lamp and LKRL-A001
anamorphic lens)
4.5-meter (15-foot) to 17-meter (55-foot) screen width on Scope
size (3.0 kW lamp)
4.5-meter (15-foot) to 14-meter (45-foot) screen width on Scope
size (2.0 kW lamp) |
|
Input/Output Specifications |
Detail: |
|
Input A |
DVI-D (HDCP) |
|
Input B |
Open (option slot for the LKRI-003 or LKRI-005
board) |
|
Input C |
A channel: MDR- 68-pin (x1) (for projector output
A of Media Block, SRLV connection)
B channel: MDR- 68-pin (x1) (for projector output B of Media Block,
SRLV connection) |
|
Interlock |
D-sub 15-pin (female) (x1), RS-232C For supply of
power to an external ventilation fan and control of its
operation |
|
Remote Control |
D-sub 15-pin (female) (x1), RS-232C
RJ-45 (x1), 10BASE-T/100BASE-TX Ethernet
DCP ingest port (x1) |
|
|
