|
|
| GN 15
(30,50) |
|
|
.jpg)
Product Code: gn153050
|
For
permanent screw-on installation, AKG offers goosenecks in various
lengths: GN 15: approx. 15 cm (6 in.); GN 30: approx. 30 cm (12
in.); GN 50: approx. 50 cm (20 in.). Except for the GN 30 OC with
unterminated cable ends, all come with a DPA in-line XLR phantom
power adapter with integrated 200 Hz bass rolloff and LED ON/OFF
jumper. The DPA connects to any standard mixer input with 9 to 52 V
power supply. The mini XLR connector will thread through any hole
from 11 mm (0.44 in.) in diameter. This eliminates the need for
large holes or awkward unsoldering and resoldering of the much
larger phantom power adapter during
installation.
The external phantom
power adapter of the GN series makes setting up the goosenecks much
easier, since a small hole will suffice for threading through a
mini XLR connector. Having disconnected the cable, the integrated
bass cut can be set quite easily inside the phantom power adapter.
The phantom power adapter will operate off any available phantom
power supply from 9 to 52 V, powering both the condenser capsule
and the LED ring.
|
|
| GN15(30,50)
Features |
- Rugged construction
- Highly reliable contacts for capsule
modules
- Integrated LED ring status
indicator
|
- Integrated switchable bass
rolloff
- Mini XLR connector or unterminated cable
ends
|
|
| GN15(30,50)
Specifications |
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: <=600 ohms
- Recommended load impedance: >=2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Powering: <3 mA
- Connector: 3-pin male XLR; GN 30 oc: stripped and tinned
leads
|
- Cable: 1.5 m (5 ft.)
- Finish: matte dark grey
- Net weight: GN 15: 72 g (2.5 oz.), GN 30: 110 g (3.9 oz.),
GN 50: 120 g (4.2 oz.)
- Shipping weight: GN 15: 400 g (14.1 oz.), GN 30: 522 g (18.4
oz.), GN 50: 495 g (17.5 oz.)
|
|
|
GN15(30,50) Standard
Accessories
|
|
|
- Screw set, Screw set with rubber
bush
|
|
|
|
