AKG Pro Audio
C 214 Stereo Set Recording & Broadcast Microphone

Product Code: C214 stereo set

Realistic stereo recordings require microphones with outstanding performance and excellent quality. It also requires performance consistency and accurate localization from the pair of microphones. Therefore, every factory-matched pair of C 214’s is created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method and the result is the highest possible correlation over the whole frequency range and virtually identical sensitivity for stunning, three-dimensional recordings.

• Absolutely perfectly matched stereo pair thanks to AKG's sophisticated computer-aided matching method
• A factory-matched pair of large diaphragm microphones for stunning, three-dimensional recordings
• Highest possible correlation over the whole frequency range and virtually identical sensitivity
• Created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method
• The cardioid-only version of the original C 414's capsule delivers AKG’s Legendary Large Diaphragm Sound

• Roadworthy Design, All-metal Die-cast body with shock- and scratch-resistant finish
• Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise)
• Switchable 20 dB Attenuation Pad and Low Cut Switch
• Comes complete with Spider-type Shock Mounts, Stand adapters, and Windscreens, a stereo pair certificate and Metal Carrying Case
• Designed, Engineered and Built in Vienna, Austria

• Polar pattern: Cardioid

• Frequency range: 20 to 20,000 Hz

• Sensitivity: 20 mV/Pa (-34 dBV)

• Max. SPL: 136/156 dB SPL (0/-20 dB) (for 0.5% THD)

• Equivalent noise level: 13 dB-A to IEC 60268-4 (A-weighted)

• Signal/noise ratio (A-weighted): 81 dB

• Preattenuation pad: 0/-20 dB (switchable)

• Bass cut filter slope: 160 Hz, 6 dB/Octave, switchable Hz; 6 dB/octave at 160 Hz

• Impedance: <=200 ohms

• Recommended load impedance: >=1000 ohms

• Supply voltage: 12 to 52 V Phantom power to IEC 61938

• Powering: < 2 mA

• Dynamic range: 123/143 dB (0/-20 dB) (A-weighted)

• Connector: IEC standard 3-pin XLR

  Finish: matte grayish blue

• Dimensions: 160 x 55 mm (6.3 x 2.2 in.)

• Net weight: 280 g (0.62 lbs.)

  Shipping weight: 1450 g (3.22 lbs.)

• Patent(s): Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)

C214StereoSet Standard Accessories

• H 85 Universal shock mount
• Soundtool Case, Hard shell road case

• W 414 Windscreen