Extron DMS 3600

Modular DVI Matrix Switcher

Expandore Singapore

Home > Extron > Modular & Expandable Switchers > DMS 3600

Extron DMS 3600 Modular DVI Matrix Switcher

Product Code: DMS3600

Extron Matrix Switchers
< DVI Matrix Switchers

The Extron DMS Series Modular DVI Matrix Switchers represent a new level of matrix switching for DVI. They combine the simplicity and reliability of a fixed I/O matrix switcher with the convenience and flexibility of a modular matrix switcher. DMS Series matrix switchers accept any combination of available DMS DVI or DMS Fiber matrix boards. Input and output boards are available in 4-port input, 4-port output, and 4x4 I/O versions, providing various I/O size combinations with sizes from 4x4 to 36x36, depending on the DMS Matrix Switcher Frame selected. The DMS Series is ideal for a wide range of applications that require routing of high-resolution DVI digital video signals without copy protection.

• Available in I/O sizes from 4x4 to 16x16 or 36x36, depending on the DMS Matrix Switcher Frame selected
• Modular and field-upgradeable design — DMS Series Matrix Switcher Frames provide substantial flexibility, expandability, and affordability by allowing users to select the configuration required for their systems. Additional input and output boards may be added at any time for easy and quick upgradeability or expansion, from 4x4 up to 36x36, depending on the DMS Frame size selected.
• Hot-swappable components — Allows the replacement of a fan assembly or power supply at any time without the need to power down the switcher. This is especially useful for mission-critical applications that require continuous system operation.
• Choice of DMS DVI or Fiber Matrix I/O boards — DMS Series DVI and Fiber Matrix input and output boards are available in 4-input, 4-output, and 4x4 I/O configurations. DMS Fiber Matrix Boards are compatible with Extron DFX Series DVI extenders, and can support transmitted distances of up to 300 meters (984 feet) on one multimode fiber.
• Mix and match DVI and Fiber Matrix Boards — DMS DVI and Fiber Matrix Boards can be mixed-and-matched within a single DMS Frame to support a wide variety of matrix switching system designs.
• Supports data rates to 4.95 Gbps - 1.65 Gbps per color
• Supports computer video up to 1920x1200, including HDTV 1080p/60
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• QS-FPC™ - QuickSwitch Front Panel Controller with tri-color backlit buttons — Provides a discrete button for each input and output, allowing for simple, intuitive operation. Buttons can be custom labeled for easy identification. The buttons illuminate red, green, or amber, depending on function, for ease of use in low-light environments.
• Ethernet monitoring and control — DMS Series matrix switchers can be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of I/O ties, EDID Minder configuration, and monitoring system status.
• Global presets — Up to 32 frequently used I/O configurations may be saved and recalled either from the front panel, serial, or Ethernet control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.
• I/O Grouping — I/O Grouping allows the matrix switcher to be virtually divided into smaller sub-switchers. Specific outputs, such as those designated for a specific area or a particular room can be grouped together for ease of installation and control.
• Rooming — Rooming allows selected outputs into grouped together into specific "rooms", each with its own set of unique presets. A total of 10 rooms, with 10 presets per room, are available.
• View I/O mode — Users can easily view which inputs and outputs are actively connected.
• Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control.
• RS-232 and RS-422 control port — Using serial commands, the DMS Series matrix switchers can be controlled and configured via the included Windows®-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.
• Optional remote control — The optional MKP 2000 and MKP 3000 X-Y Remote Control Panels provide the flexibility to control the DMS Series matrix switcher from a remote location.
• Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel controller.
• Redundant, hot-swappable power supplies — A redundant power supply is included with the DMS 3600 and available as an option for the DMS 1600. Primary and back-up power supplies provide added reliability for critical applications.
• Two AC power inputs — For added power reliability, some 24-hour environments require two separate AC power sources, one as the primary source and the second for redundancy. The DMS 1600 and DMS 3600 matrix switcher frames offer two AC power inputs for continuous connection to both power sources.
• Rack-mountable, full rack width metal enclosures

Video — DMS DVI

Routing

1600 Series

From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs

2000 Series

From 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs

3200 Series

From 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs

3600 Series

From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs

Gain

Unity

Resolution range

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz

Signal type

Single-link DVI digital video signals are supported.

Digital video

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)

NOTE	The DMS DVI Series boards are not HDCP compliant.

Digital audio

Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

Not supported

HPD

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate

4.95 Gbps (1.65 Gbps per color)

Maximum pixel clock

165 MHz

Standards

DVI 1.0

Switching speed

200 ns, max.

Video input — DMS 44 DVI and DMS 4i DVI input boards

Number/signal type

4 digital RGB single link DVI-D per input board

Connectors

4 female DVI-I (digital only) per input board

Equalization

Automatic

Input cable length

100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — DMS 44 DVI and DMS 4o DVI output boards

Number/signal type

4 digital RGB single link DVI-D per output board

Connectors

4 female DVI-I (digital only) per output board

Re-clocking

Automatic

Output cable length

50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p

Peripheral device power

250 mA per output

Optical specifications — fiber optic boards

NOTE	The I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Number/type

4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board

Connectors

4 or 8 LC connectors per I/O board

Operating distance

300 m (985')

NOTE	Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength

850 nm for multimode (MM)

Transmission power

-5 dBm, typical

Maximum receiver sensitivity

-12 dBm, typical

Optical loss budget

8 dB, maximum

Maximum channel data rate

6.25 Gbps

Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards)

Routing

1600 Series

4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs

2000 Series

4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs

3200 Series

4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs

3600 Series

4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs

Video input — DMS 44 fiber and DMS 4i fiber input boards

NOTE	The fiber optic input boards require connection to a DFX 100 Tx transmitter.

Number/signal type

4 fiber optic, multimode (OM3 or OM4 fiber recommended)

Connectors

4 LC connectors

Input cable length

300 m (985')

NOTE	The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.

Video output — DMS 44 fiber and DMS 4o fiber output boards

NOTE	The fiber optic output boards require connection to a DFX 100 Rx receiver.

Number/signal type

4 fiber optic, multimode (OM3 or OM 4 recommended)

Connectors

4 LC connectors per board

Output cable length

300 m (985')

Communications — switcher host ports

Serial host control port

1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector

Baud rate and protocol

9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin female D connector

RS-232

2 = Tx, 3 = Rx, 5 = Gnd

RS-422

2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+

USB control ports

1 front panel female mini USB B

USB standards

USB 2.0, low speed

Ethernet control port

1 RJ-45 female

Ethernet data rate (for network communication)

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet

Ethernet default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off

Web server

Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory

Program control

Extron control/configuration program for Windows^®
Extron Simple Instruction Set (SIS^™)
Microsoft^® Internet Explorer^® ver. 6 or higher, Telnet

General

Power supply

DMS 1600

Internal: 1 or 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional.

DMS 2000

Internal: 1
Input: 100-240 VAC, 50-60 Hz

DMS 3200

Internal: 1
Input: 100-240 VAC, 50-60 Hz

DMS 3600

Internal, 2*(positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard.

Power consumption

DMS 1600

Primary power supply: 97 watts
Primary and redundant supplies: 107 watts
Measured fully loaded with (4) 4x4 I/O boards

DMS 2000

116 watts
Measured fully loaded with (5) 4x4 I/O boards

DMS 3200

174 watts
Measured fully loaded with (8) 4x4 I/O boards

DMS 3600

212 watts
Measured fully loaded with (9) 4x4 I/O boards

I/O boards

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Fan, right to left (as viewed from front panel)

Thermal dissipation, full load

DMS 1600

Primary power supply: 332 BTU/hr
Primary and redundant supplies: 366 BTU/hr
Measured fully loaded with (4) 4x4 I/O boards

DMS 2000

398 BTU/hr
Measured fully loaded with (5) 4x4 I/O boards

DMS 3200

596 BTU/hr
Measured fully loaded with (8) 4x4 I/O boards

DMS 3600

724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

DMS 1600

7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 2000

5.2" H x 17.0" W x 12.2" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 3200

8.7" H x 17.0" W x 12.2" D (5U high, full rack wide)
(22.1 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)

DMS 3600

14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)

Product weight with boards installed

DMS 1600

With primary power supply only

26.9 lbs (12.2 kg)

With both primary and redundant power supplies

27.9 lbs (12.6 kg)

DMS 2000

16.4 lbs (7.5 kg)

DMS 3200

27.1 lbs (12.3 kg)

DMS 3600

38.5 lbs (17.5 kg)

Shipping weight with boards installed

DMS 1600

32 lbs (15 kg)

DMS 2000

21 lbs (10 kg)

DMS 3200

33 lbs (15 kg)

DMS 3600

48 lbs (22 kg)

DIM weight with boards installed

USA/Canada

DMS 2000

23 lbs (11 kg)

DMS 3200

39 lbs (18 kg)

International

DMS 2000

28 lbs (13 kg)

DMS 3200

47 lbs (22 kg)

DMS 3600

52 lbs (24 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

DMS 1600 and DMS 3600

CE, C-tick, FCC Class A, ICES, KCC, VCCI

DMS 2000 and DMS 3200

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE

Warranty

3 years parts and labor

Products

Fiber Optic

XTP CrossPoint

Twisted Pair

Modular & Expandable

ISM 824

SMX System MultiMatrix

DMS 1600

DMS 3600

DMS 2000

DMS 3200

FOX Matrix 3200

FOX Matrix 7200

FOX Matrix 14400

FOX Matrix 320x

Matrix 1K

Matrix 12800 Series

Matrix 3200 Series

Matrix 6400 Audio

Matrix 6400 Series

HDMI

DVI Switchers

SDI/HD-SDI

Ultra-Wideband RGB

Media Presentation

Scaling

VGA & Stereo Audio

AV Matrix Switchers

l

View our Articles on line 2023