Aputure Spotlight Mount Light modifier

Aputure Spotlight Mount

Aputure Spotlight Mount Light shaping tool


  Spotlight Mount Set (19°) Aputure Spotlight Mount Set (19°)
  Spotlight Mount Set (26°) Aputure Spotlight Mount Set (26°)
  Spotlight Mount Set (36°) Aputure Spotlight Mount Set (36°)
 Spotlight Mount lens only (19°) Aputure Spotlight Mount Set (19°)
 Spotlight Mount lens only (26°) Aputure Spotlight Mount Set (26°)
 Spotlight Mount lens only (36°) Aputure Spotlight Mount Set (36°)
  Spotlight Mount Iris only Aputure Spotlight Mount Iris 


• Bowens Mount
• Lens Included
• Dual Drop-In Slots
• Aluminum Alloy Housing

Aputure Spotlight Mount enters into a whole new class of modifiers with the introduction of the world’s first Bowens spotlight mount. Achieve a greater degree of control with the Spotlight Mount’s internal shutter blades for sharp cuts. Acquire pinpoint accuracy when projecting your light with your choice of 3 different lenses.

Precision Optics
The three lenses for the Spotlight Mount were designed with professionals in mind. In addition to allowing the 120d II to produce 10 times its original output, the high-resolution lenses produce an even beam of light, with minimal light falloff on the edges, while maintaining a shift in color temperature of less than 200 degrees Kelvin.

Minimal Edge Fringing
Aputure Spotlight Mount new lens technology minimizes chromatic aberrations around the edge of the illumination circle. Compared to similar ellipsoidal fixtures, the Spotlight Mount significantly decreases its edge color fringing to a mere 1mm at a distance of 5 meters.

Modular Design
In line with Aputure’s other high-quality lighting modifiers, the Spotlight Mount maintains Aputure’s philosophy of versatility and modularity by utilizing the Bowens mount, for use with 120d Mark II and 300d lights.

Dual Junior/Baby Mount
Spotlight Mount is created with rigging in mind. Aputure gave the Aputure Spotlight a dual Junior/Baby mount so it can be attached to anything from a C-Stand to a Combo Stand or underslung from a lighting grid.

Durable Metal Body
The Spotlight Mount is built to last. With its aluminum alloy die-cast metal body, it maintains Aputure’s standards for durability while utilizing a more lightweight design than typical tungsten ellipsoidal lights. The Spotlight Mount is ready for wherever your filmmaking adventures take you.

About 19° Spotlight Mount
Perfect for anyone who needs max. Light output and wants accurate control of light beam. Suitable for large setup when you need the Light beam to be strong, 19° Spotlight Mount has twice the light output of 36° and 20% more than 26°. It’s beam diameter is approx. 1/2 of 36° Spotlight Mount.

About 26° Spotlight Mount
If both light output and beam diameter is important to you, this maybe the perfect solution. It has approx. 20% less output than 19° Spotlight Mount, Beam diameter approx. 65% of 36° Spotlight Mount. More versatile comparing to other 2 options design suitable for more kinds of setups.

About 36° Spotlight Mount
Perfect for restricted setup where wide beam of light is required, @3m distance, it has a beam diameter of 180cm which is twice as wide as 19° Spotlight Mount. 36° Spotlight Mount has the least light output among the three options.