Clear-Com PSU-101

 

PSU-101

Clear-Com Interface Frames

Clear-Com PSU-101

Read our blog, or visit our new site
Home > Clear-Com > Digital Matrix Intercom > Interface Frame > PSU-101  
 Clear-Com PSU-101 1RU Power Supply for IMF-3 Interface frame

Clear-Com PSU-101
Product Code: PSU101
Buy Sell Sales Clear-Com PSU-101

review button

PSU-101 Power Supply for the IMF-3. (Does not power the Party Lines attached to CCI-22 modules. These require Encore Master Station PSUs such as the PK-7, PS-702 or MS-702). The PSU-101 is the power supply for the IMF-3 interface frame. It has both an audible failure alarm and failure relay contacts to activate a remote signal. A single PSU-101 will power a minimum of two interface frames, depending on the type of interfaces and their individual power requirements.

Technical Details of PSU101
Two 9-volt switching supplies with audible failure alarm
 
Output Current 3 Amps
 
Indicators 2 power supply LEDs
 
Rear Panel Connectors Alarm Out: SPST relay @ 1 amp DC rating
Mains Connector: IEC 3-pin connector
 
AC Power Input Voltage: 90 - 260 VAC
Power: 125 Volt-Amps maximum
Frequency: 50 - 60 Hz
 
Size 1.75" H x 19" W x 7.75" D (44 x 483 x 197 mm)
 
Weight 4.5 lbs (2 Kg)
 

 

Clear-Com

Digital Matrix

System Frame

Eclipse-Omega
Eclipse-Median
Eclipse-PiCo

User Panel

V12LDXY
V12PDXY
V12RDX
V24LDXY
V24PDXY
V24RDX
V12LDDXY
V12PDDXY
V12RDDX
V12LDE
V12PDE
 i-Series panel
V12RDE
ICS-1008E
ICS-1016E
AP-22
ICS-2003
ICS-22

Interface Card

E-MADI
E-FIB
E-Que
 IVC-32
MVX-A16
LMC-64

Interface Frame

BAL-8
IFB-104
IMF-102
 IMF-3
PSU-101
TW-60
FIM-202D

Interface Module

AES-6
CCI-22
FOR-22
GPI-6
RLY-6
TEL-14

Software

Logic-Maestro

Production-Maestro-Pro

Party-Line

Wireless Intercom

IP Communication

HelixNet

Accessories

email us

contact us