| RS- 602 2-Channel
Dual Listen Beltpack (uses 6-pin XLR) (Discontinued) |
|
Product Code: RS602
|
The RS-602 is a 2-channel, dual listen monaural beltpack with a
4-pin male headset connector and 6-pin female/male loop through
intercom line connectors. It requires YC-36 adapter to connect with
standard 3-pin cabling, 2.5mm AUX headset connector and an RS-232
data connector for programming.
The beltpack can be programmed using the V-pack software, which
does not require beltpack to be opened or any dip switches changed,
etc.
|
| Technical Details of RS-602 |
| General |
Amplifier Design: I.C. amplifiers, including solid-state
digital switching and signaling circuits. Current-limited and
short-circuit protected.
Signal to Noise: >75 dB
Bridging Impedance: >15k
Line Level: -14 dB, +5 dB max.
Sidetone Adjust: >35 dB
EMI and RFI rejection: >60 dB
|
Microphone Pre-Amplifier
|
Headset Mic Impedance: 200 Ω
Gain, mic to line: 41 dB (dynamic)
Limiter Range: 26 dB
Frequency Response: 200 Hz – 12 kHz contoured for
intelligibility
|
| Headphone
Amplifier |
Load
Impedance: 50 - 2,000 Ω
Output Level: +17 dBv before clipping
Distortion: <0.1% THD @ 1 kHz
Gain, line to output: +34 dB
Frequency Response: 100 Hz - 18 kHz, ±2dB
|
| Program Input |
Program input : Balanced, transformer isolated
Input sensitivity: –20 dBv to +10 dBv
Frequency response: 50 Hz – 18 Hz, ± 2 dB
|
| Connectors |
Intercom Line: (2) 6-pin XLR–M–F
Headset: 4-pin XLR–M
|
| Power Requirements |
DC Voltage Range: 12-32 volts
|
| Environmental |
0˚C - 70˚C (32˚F - 158˚F)
0 - 90% relative humidity
|
| Dimensions |
4.58 in. H x 3.73 in. W x 1.34 in. D
(116 x 95 x 34 mm)
|
| Weight |
7.8 oz.
(0.22 kg)
|
|
|
|
|
