| DLP™ chip |
Panel size |
21.6 mm (0.85 in) diagonal (16:9 aspect ratio) |
| Display method |
DLP™ chip x 3, DLP™ projection system |
| Pixels |
1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels |
| Lamp |
380 W UHM lamps (HIGH mode) x 2 |
| Brightness*1 |
11,000 lm*3 (dual-lamp) |
| Contrast ratio*1 |
10,000:1 (full on/off, with DYNAMIC IRIS set to "3") |
| Screen size (diagonal) |
1.78 -25.4 m (70-1,000 in), 1.78 -15.24 m (70-600 in) with the ET-D75LE8, 16:9 aspect ratio |
| Center-to-corner uniformity*2 |
90 % |
| Resolution |
1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.) |
| Optical axis shift |
Vertical: ±70 % (±60 % with the ET-D75LE6)
from center of screen (powered) Horizontal: ±30 % (±20 % with the ET-D75LE6) from center of screen (powered) |
| Scanning frequency |
SDI |
| 3G-SDI |
- |
| HD-SDI |
- |
| SD-SDI |
- |
| HDMI/DVI-D |
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*4
(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz |
| RGB |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz |
| YPBPR (YCBCR) |
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 56.25 kHz, fV: 50 Hz [1080/50p] |
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 67.50 kHz, fV: 60 Hz [1080/60p] |
| Video/Y/C |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Terminals |
SDI IN |
- |
| 3D SYNC IN/OUT |
BNC x 1 (3D timing signal) |
| 3D SYNC OUT |
BNC x 1 (3D timing signal) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| RGB 1 IN |
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) |
| RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) |
| VIDEO IN |
BNC x 1 (composite video) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE 1 IN |
M3 x 1 for wired remote control |
| REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN |
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) |
| Keystone correction range |
Vertical: ±40° |
| Installation |
Ceiling/floor, front /rear, portrait |
| Cabinet materials |
Molded plastic |
| Power supply |
120 V, 220-240 V AC, 50/60 Hz |
| Power consumption |
120 V AC |
980 W (1,010 VA) |
(0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.) |
| 220-240 V AC |
950 W (980 VA) |
(0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.) |
| Dissipation BTU |
120 V: 3,345 BTU/hour (without light output: 3,195 BTU/hour). 220-240 V: 3,242 BTU/hour (without light output: 3,092 BTU/hour) |
| Dimensions (W x H x D) |
530 x 200*8 x 548.5 mm (20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included) |
| Weight |
Approximately 24 kg (52.9 lbs) (optional lens not included) |
| Operating Environment |
Operating temperature: 0-45°C (32-113°F), operating humidity: 10-80 % (no condensation) |
| Operation noise |
45 dB (dual lamp operation with lamp HIGH mode), 43 dB (dual lamp operation with lamp MIDDLE mode), 37 dB (dual lamp operation with lamp ECO mode) |
| Applicable software |
Logo Transfer Software, Multi Projector Monitoring & Control Software, |
| Supplied accessories |
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2) |