Sony SRX-T110

PCSA-MCG80

Sony MCU Software for PCS-XG80 Videoconferencing System

Sony PCSA-MCG80
Read our blog, or visit our new site

Home > Video Conferencing > Optional Accessories PCSA-MCG80

contact usSony PCSA-MCG80
 Sony PCSA-MCG80 MCU Software for PCS-XG80 Videoconferencing System

 Sony PCSA-MCG80
Product Code: PCSAMCG80
Buy Sell Sales Sony PCSA-MCG80
review

MCU Software for PCS-XG80 Videoconferencing System

This USB flash memory carries Multi-point Control Unit (MCU) software exclusively for the Sony PCS-XG80 Videoconferencing System.

By installing PCSA-MCG80 MCU software, the PCS-XG80 can be configured to communicate with up to five remote videoconferencing sites (six sites total) simultaneously, using either an IP (H.323 or SIP protocol) or ISDN (H.320 protocol) connection. ‘Bridging’ allows using any combination of IP and ISDN connections.

Two PCS-XG80 units – each installed with PCSA-MCG80 MCU software – can be cascaded to support large-scale multi-point conferences with up to ten sites simultaneously.
 
Hold multi-point conferences
Work more efficiently and productively: MCU software allows the PCS-XG80 to be configured for virtual meetings with up to five remote videoconferencing sites (six sites total).

Use IP or ISDN connections
For maximum flexibility, participants at remote sites can connect using IP (H.323 or SIP protocol) or ISDN (H.320 protocol) – or any mix of IP and ISDN connections.

Large-scale conferences with up to ten sites
PCSA-MCG80 MCU software also allows two PCS-XG80 Videoconferencing Systems to be ‘cascaded’ (via IP connection), supporting large-scale multi-point conferences with up to ten sites linked simultaneously.
 

 

Check it out on our new Expandore web site