AKG Pro Audio
 WMS 40 Pro Transformer Set
 Analog Wireless Microphones Systems

Homepage

 Azden Sound Devices Sennheiser Tascam Yamaha  JBL  Mackie Projector Monitor Tapes E-Shop Contact us Email us Visit Us
Home > AKG Pro Audio > Analog Wireless Microphone Systems > WMS 40 Pro > WMS 40 Pro Transfomer Set > SO 40  
 
  Wireless
  Digital Wireless Microphones Systems
  Analog Wireless Microphones Systems
  WMS 4500
  WMS 450
  WMS 40 PRO
      WMS 40 Pro Vocal
      WMS 40 Pro Instrumental
      WMS 40 Pro Sports
      WMS 40 Pro Guitar
      WMS 40 Pro Transformer Set
      WMS 40 Pro Presenter
      GB 40 Flexx
      GB 40
      CU 400
  System Components
  Multichannel Systems
  In-ear Monitoring Systems  
  HiQnet
  Recording
  Recording Microphones
  Recording & Broadcast Microphones
  ULS Series
  AKG Blue Line
  Perception
  USB Microphones
  Stage
  Handheld Microphones
  Instrument Microphones
  Clip-on Microphones
  Head-worn Microphones
  Crown Microphones
  Lavalier Microphones
  Installed  
  Gooseneck Microphones
  Hanging Microphones
  Paging Microphones
  Boundary Layer & Shotgun Microphones
  Crown Microphones
  Conference Systems
  Automixer
  Headphones
  Professional Headphones
  Headsets
  Accessories
  AC Power Supplies
  Adapters
  Battery Power Supplies
  Cables
  Carrying Cases And Bags
  Goosenecks
  Microphone Stands
  Rack Mount Units
  Stand Adapters
  Suspensions And Clamps
  Windscreen And Pop Filters
  Miscellaneous
SO40


Product Code: so40
 LaCie d2 Network 2 301504

 The SO 40 snapon transmitter is probably the most cost efficient way to upgrade a hardwire microphone for wireless use. All you have to do is disconnect the microphone cable and plug the snapon transmitter into the XLR connector on the microphone. The snapon transmitter with its small and light glass fiber reinforced case will add less weight to the microphone than the cable did.

An input gain control lets you match the SO 40 to the microphone output level. A noiseless on/off switch allows you to mute any microphone with no on/off switch. Replaceable color code elements allow easy identification of the various microphone channels in any multichannel concert setup.

 
SO40 Features
  • Professional XLR connector matching all dynamic microphones
  • Ultra-light, glass fiber reinforced miniature case
  • Integrated charging contacts
  • Extremely low operating cost
SO40 Specifications
  • Carrier frequency range: 710 MHz to 865 MHz
  • Audio bandwidth: 40 to 20,000 Hz
  • THD: 0.8% typ.
  • Signal/noise ratio: 103 dB (A) typ.
  • Modulation: FM
  • RF output power: 5 mW typ. (ERP)
  • Power supply single: 1.5 V AAA size battery
  • Battery life: >10 hours (dry batteries), >5 hours (rechargeable batteries)
  • Dimensions: 22 x 30 x 98 mm / 0.9 x 1.2 x 3.9 in.
  • Net weight: 36 g / 1.3 oz.
     

SO40 Standard Accessories

  • 1 AA size dry battery
  • Battery compartment cover
 

Read our blogs