| DPA IMK-SC4060 Instrument Microphone Kit with
4060 |
|
Product Code: IMKSC4060
|
Containing a d:screet™ SC4060
Miniature Microphone with DPA reinforced cable relief and a XLR
adapter DAD6001-BC with a selection of our unique mounting
accessories, this kit is designed to use as a close miking solution
for a wide variety of musical instruments. The SC4060 microphone
offers a very clean, detailed and natural sound quality, leaving
placement up to the user, in order to receive the desired timbre
for studio use or amplification for live use.
Included are holders for strings, universal surface mounts with
double sided tape, a magnet mount and foam windscreens.
For maximum versatility, the DPA adapter system makes it possible
to use the SC4060 with close to any professional wireless system
available.
Also available as IMK-SC4061 with a SC4061 Miniature
Omnidirectional Microphone, Lo-Sens. |
• 1 x
SC4060 Omnidirectional Mic, Hi-Sens
• 1 x DAD6001-BC Adapter, MicroDot to 3-pin XLR (P48) w. Belt
Clip
• 1 x DMM0002-B Miniature Double Pin
• 1 x DMM0007 Universal Surface Mount, 5 pcs.
• 1 x DMM0011-B Magnet Mount
• 1 x DUA0560 Windscreens, Black, 5 pcs.
• 2 x Microphone Holder for Strings
The IMK-SC4060 kit is still available with the original
d:screet™ 4060 Miniature Mics without the reinforced cable
relief upon request. |
| Directional
characteristics: |
Omnidirectional |
| Principle of
operation: |
Pressure |
| Cartridge type: |
Pre-polarized condenser element with vertical
diaphragm |
| Frequency range,
± 2 dB: |
Soft boost grid: 20 Hz - 20 kHz ±2 dB, 3 dB soft boost
at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB
boost at 12 kHz |
| Sensitivity, nominal, ±3
dB: |
20 mV/Pa; -34 dB re. 1 V/Pa |
| Equivalent noise level
A-weighted: |
Typ. 23 dB(A) re. 20 µPa (max. 26
dB(A)) |
| Equiv. noise level ITU-R
BS.468-4: |
Typ. 35 dB (max. 38 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94
dB SPL): |
71 dB(A) |
| Total harmonic distortion
(THD): |
<1% THD up to 123 dB SPL
peak |
| Dynamic range: |
Typ. 100 dB |
| Max. SPL, peak before
clipping: |
134 dB |
| Output impedance: |
30-40 Ohm |
| Cable drive
capability: |
Up to 300 m (984 ft) |
| Power
supply: |
For wireless systems: Min. 5 V – max. 50 V
through DPA adapter; with DAD6001: 48 V phantom power ±4
V. |
| Connector: |
MicroDot |
| Weight: |
<7.5 g (0.26 oz) incl. cable and MicroDot
connector |
| Microphone length: |
12.7 mm (0.5 in) |
| Cable length: |
1.8 m (6 ft) |
|
| |
|
|
|
|
