| Extron XTP R HDMI XTP Receiver for HDMI |
Product Code:
XTPRHDMI
 |
The Extron XTP R HDMI is an
XTP® receiver that accepts video, audio, bidirectional RS-232
and IR, and Ethernet up to 330 feet (100 m) over a shielded CATx
cable. The receiver features HDMI audio de-embedding with digital
S/PDIF or analog stereo audio outputs. It also allows Ethernet
extension and insertion of bidirectional RS-232 and IR for LAN
access and AV device control at remote locations. The XTP R HDMI
receiver works with XTP Systems® for signal distribution and
long-distance transmission between remote endpoints.
The XTP R HDMI receiver is HDCP compliant and supports 1080p/60
Deep Color and 1920x1200 signals. It enables the reliable, long
distance distribution of HDMI signals, supporting Deep Color up to
12-bit, embedded HD lossless audio formats, and CEC pass-through.
In addition, DDC channels are actively buffered, allowing EDID and
HDCP communication to be maintained between a source and display.
Continuous communication ensures device compatibility and optimal
signal transmission between devices.
The receiver includes Extron-exclusive technologies to enhance and
simplify integration with HDMI-equipped devices. For HDMI signals
with protected content, Key Minder® authenticates and
maintains HDCP encryption to provide quick and reliable
transmission across the cable infrastructure. If HDCP-encrypted
content is sent to a non-compliant display, a full-screen green
signal is sent, providing immediate visual notification that
protected content cannot be viewed on the display. Another included
technology is EDID Minder®, which ensures continuous EDID
communication between devices.
In addition to high performance video, the receiver accepts audio
signals over the shielded CATx cable. It provides signal
distribution for HDMI embedded audio or audio de-embedding with
multi-channel S/PDIF or two-channel balanced/unbalanced analog
stereo and PCM audio. To precisely control audio, the XTP R HDMI
includes volume adjustment and muting. The variety of audio
transmission and control features helps to simplify system design
and reduce the number of cable runs between endpoints.
The XTP R HDMI includes an RS-232 and IR insertion port, allowing
bidirectional control of an AV device using the one cable. This
feature simplifies integration with a control system for managing a
remote display. Additionally, centralized 10/100 Ethernet
communication can be implemented via Ethernet extension port to
reduce the number of independent network drops required within a
system. Finally, two relays on the receiver can be activated to
operate a screen, projector lift, or other environmental element at
the display location.
To further simplify system design, the receiver can be powered by
the matrix switcher over the same twisted pair cable that transmits
the AV and control signals. This capability speeds up installation
at remote endpoints by eliminating the need to provide AC power to
the device. Housed in a 1" (2.5 cm) high, half rack width metal
enclosure, the remote powering capabilities and low profile design
of the XTP R HDMI allow for discreet placement in space-challenged
environments.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair
cable, shielded RJ-45 plugs, jacks, and couplers engineered for
optimum signal transmission with Extron XTP Systems. The XTP DTP 24
cable is certified to 475 MHz, and utilizes a SF/UTP design with
four unshielded 24 AWG twisted pair conductors inside an overall
braid and foil shield for superior performance and noise
immunity.
. |
• Receives
video with embedded audio, bidirectional RS-232 and IR, and
Ethernet up to 330 feet (100 m) over a shielded CATx cable —
The XTP R HDMI provides high reliability and maximum performance on
an economical and easily installed cable infrastructure.
• Supports computer video up to 1920x1200, including HDTV
1080p/60 Deep Color and 2K — Supports digital signal
transmission up to 330 feet over a shielded twisted pair cable,
maintaining superior image quality at the highest resolutions.
• Compatible with CATx shielded twisted pair cable —
The XTP R HDMI fully supports a maximum transmission distance of
330 feet (100 meters) for all compatible resolutions when used with
CATx shielded twisted pair cable. Shielded twisted pair cabling
with solid center conductor sizes of 24 AWG or better is
recommended for optimal performance.
• Extron XTP DTP 24 shielded twisted pair cable is strongly
recommended for optimal performance
• Bidirectional RS-232 and IR insertion for AV device control
— Bidirectional RS-232 control and IR signals can be
transmitted alongside the video signal, allowing the remote display
to be controlled without the need for additional cabling.
• Supported HDMI specification features include data rates up
to 6.75 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio
formats, and CEC pass-through
• HDCP compliant — Ensures display of content-protected
media and interoperability with other HDCP-compliant devices.
Requires an HDCP-compliant transmitter to pass HDCP content with
this receiver.
• EDID Minder® automatically manages EDID communication
between connected devices — EDID Minder ensures that all
sources power up properly and reliably output content for
display.
• Key Minder® continuously verifies HDCP compliance for
quick, reliable switching — Key Minder authenticates and
maintains continuous HDCP encryption between input and output
devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single
source to multiple displays.
• Ethernet extension — Centralized 10/100 Ethernet
communication can be implemented via an Ethernet pass-through port
to reduce the amount of independent network drops required within a
system.
• HDMI audio de-embedding with analog stereo and digital
S/PDIF audio outputs — Digital HDMI audio is made available
as a balanced or unbalanced analog stereo signal on captive screw
connectors.
• Remote power capability — To simplify integration,
XTP transmitters and receivers can be powered by the XTP CrossPoint
matrix switcher.
• Supports multiple embedded audio formats
• Supports EDID and HDCP transmission — DDC channels
are actively buffered, allowing continuous communication between
source and display.
• Selectable HDMI audio pass-through — A rear panel
toggle switch enables or disables audio signal pass-through on the
HDMI output.
• HDMI to DVI Interface Format Correction —
Automatically reformats HDMI source signals for output to a
connected DVI display.
• Audio output volume adjustment and muting
• Contact closure device control — Enables control of
room functions such as projector lifts, screen operations, and
other environmental controls.
• Comprehensive, LED indicators for signal presence, HDCP,
and power — Provides visual indication of system status for
real-time feedback and monitoring of key performance
parameters.
• RJ-45 signal and link status LED indicator for XTP port
— Provides a means for validating signal flow and operation
from transmitter to receiver, allowing quick identification of
connectivity issues.
• Compatible with all XTP integrated system products —
XTP is a flexible, reliable signal switching and distribution
system that provides a completely integrated solution for multiple
digital and analog formats.
• Front panel USB configuration port — Provides
convenient access for setup, configuration, and firmware
updates.
• UL 2043 plenum rated — The XTP R HDMI meets UL 2043
for smoke and heat release for installation within a plenum
airspace above a drop ceiling - power supply excluded.
Above-the-ceiling placement conceals the receiver to prevent theft,
and is convenient for installing equipment when space inside the
room is limited.
• 1" (2.5 cm) high, half rack width metal enclosure —
The low profile enclosure allows the unit to be installed
discreetly such as mounted with a projector or placed behind a
flat-panel display.
• Includes LockIt® HDMI cable lacing brackets
• Highly reliable, energy-efficient external universal power
supply included
|
|
NOTE
|
The XTP T HDMI transmitter and
XTP R HDMI receiver can be used together, with twisted pair
cables linking the transmitter and receiver, or with other Extron
XTP products.
|
|
|
NOTE
|
*Appropriate HDMI to DVI-D cables or adapters are
required for DVI signal input/output.
|
|
|
Video |
|
Gain
|
Unity
|
|
Resolution range
|
Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
|
|
Signal type
|
Single-link HDMI (or DVI-D*)
|
|
Digital
video
|
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital
component video (HDMI), actively buffered (supports all single-link
DVI (if using an optional adapter) and HDMI standards from 640x480
@ 60 Hz to 1920x1200 @ 60 Hz)
|
|
Consumer
Electronics Control (CEC)
|
Pass-through
|
|
EDID
and DDC
|
Supports Extended Display Identification Data (EDID) and
Display Data Channel (DDC) data using DVI and HDMI standards.
EDID and DDC signals are actively buffered.
|
|
HDCP
|
Compliant with High-bandwidth Digital Content Protection (HDCP)
using DVI and HDMI standards
|
|
HPD
|
Supports hot plug detection (HPD) of display as a pass-through
signal.
|
|
Maximum data rate
|
6.75 Gbps (2.25 Gbps per color)
|
|
Maximum pixel clock
|
165 MHz
|
|
Formats
|
RGB and YCbCr digital video
|
|
Standards
|
DVI 1.0, HDMI; HDCP 1.1
|
|
Interconnection between transmitter and
receiver |
|
Connectors
|
1 female RJ-45 per unit
|
|
Termination
standards
|
TIA/EIA T568B
|
|
Signal transmission
distance
|
330' (100 m) using shielded twisted pair or XTP DTP 24
cable
|
|
Cable
requirements
|
Solid conductor, 24 AWG or better
|
|
Cable
recommendations
|
400 MHz bandwidth, STP (Shielded Twisted
Pair)
|
|
NOTE
|
Extron
XTP DTP
24 shielded twisted pair cable is stongly recommended for optimal
performance.
|
|
|
Video output |
|
Number/signal type
|
1 single link HDMI (or DVI-D*)
|
|
Connectors
|
1 female HDMI type A
|
|
Audio |
|
Gain
|
Unbalanced output: 0 dB; balanced output: +6
dB
|
|
Frequency response
|
20 Hz to 20 kHz, ±0.05 dB
|
|
THD + Noise
|
<0.1% @ 20 Hz - 20 kHz at nominal level
|
|
S/N
|
>90 dB, at maximum balanced output
(unweighted)
|
|
Crosstalk
|
≤-80 dB @ 1 kHz, fully loaded
|
|
Stereo channel
separation
|
>80 dB @ 1 kHz
|
|
Sampling rates
|
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
|
|
Bit depths
|
16, 20, 24 bit
|
|
Audio output |
|
Number/signal type
|
1 analog stereo (2-channel), balanced/unbalanced
1 digital audio, embedded with HDMI output
1 digital audio via S/PDIF output connector
|
|
Connectors
|
(1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack
|
|
Supported formats
|
|
HDMI
|
LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital
Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0
Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES
Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2
Channel
|
|
S/PDIF
|
LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital
5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete
6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2
Channel
|
|
Analog
|
Analog stereo audio
|
|
Impedance
|
|
Analog
|
50 ohms unbalanced, 100 ohms balanced
|
|
Digital
|
75 ohms (for S/PDIF output)
|
|
Maximum level
(Hi-Z)
|
>+12 dBV balanced; +6 dBV unbalanced
|
|
Gain error
|
±0.5 dB channel to channel
|
|
Volume control
range
|
-100 dB to 0 dB (control 0 to 100 in 1 dB
steps)
|
|
NOTE
|
Attenuation = volume number minus 64. The default
is 0 dB = volume number 64.
|
|
|
NOTE
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈
2 dBu
|
|
|
Control/remote —
receiver |
|
USB control ports
|
1 front panel female mini USB B
|
|
USB standards
|
USB 2.0, low speed
|
|
Program control
|
Extron
control/configuration program for
Windows®
Extron Simple Instruction Set (SIS™)
|
|
Control/remote — external device
(pass-through, unidirectional or
bidirectional) |
|
Serial control port
input/output
|
1 set of proprietary signals on a female RJ-45
jack
|
|
Serial control port
output/input
|
RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector
(uses 3 poles) (connector is shared with IR control
port)
|
|
Baud rates
|
Up to 115200 baud
|
|
Protocol
|
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
|
|
Serial control pin
configuration
|
1 = Tx, 2 = Rx, 3 = GND
|
|
Ethernet pass-through
port
|
1 female RJ-45 connector
|
|
Ethernet data rate
|
10/100Base-T, half/full duplex with
autodetect
|
|
IR control port
|
(1) 3.5 mm, captive screw connector, 5 pole (connector is
shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to
40 kHz
|
|
IR control pin
configuration
|
3 = GND, 4 = IR Tx, 5 = IR Rx
|
|
Relay number/type
|
2 normally open relays
|
|
Relay control
connectors
|
(1) 3.5 mm captive screw connectors, 4 pole
|
|
Relay control contact
rating
|
24 V, 1 A
|
|
General |
|
Power supply
|
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
|
|
Power consumption
|
|
Device
|
8.9 watts, 12 VDC
|
|
Device
and power supply
|
10.8 watts, 12 VDC
|
|
NOTE
|
Each XTP receiver can be powered either locally by
an external power supply or remotely using an optional power
injector.
|
|
|
Temperature/humidity
|
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing
|
|
Cooling
|
Convection, vents on sides and top
|
|
Thermal dissipation
|
|
Device
|
29.9 BTU/hr
|
|
Device
and power supply
|
36.6 BTU/hr
|
|
Mounting
|
|
Rack
mount
|
Yes, with optional 1U high rack shelf
|
|
Furniture
mount
|
Yes, with optional under-desk mounting kit
|
|
Enclosure type
|
Metal
|
|
Enclosure
dimensions
|
1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
|
|
Product weight
|
1.6 lbs (0.7 kg)
|
|
Shipping weight
|
4 lbs (2 kg)
|
|
Vibration
|
ISTA 1A in carton (International Safe Transit
Association)
|
|
Regulatory
compliance
|
|
Safety
|
CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and
smoke release, excluding the power supply.
|
|
EMI/EMC
|
CE**, C-tick, FCC Class A**, ICES, VCCI
|
|
Environmental
|
Complies with the appropriate requirements of RoHS,
WEEE.
|
|
NOTE
|
**CE and FCC testing is conducted with STP
(shielded twisted pair) cable.
|
|
|
Warranty
|
3 years parts and labor
|
|
NOTE
|
All nominal levels are at
±10%.
|
|
|
| |
|
|
| |
|
|
