|
Extender
requires AF-201AV transmitter and
FA-201AV receiver. Analogue video
input signal is digitized (10bit)
pixel for pixel in the transmitter,
is sent digitally through the fiber
cable, and is converted back to
analog video in the receiver. Analog
audio signals are digitized (20bit)
in the transmitter, is sent through
the fiber cable, and is converted
back to analog audio in the
receiver.
Analoque can be
transmitted up to 20km over single
mode fiber. The AF-201AV transmitter
is a class 1 laser product.
AF-201AV provides built-in color
bars and embedded 2 channel audio
signal (1KHz and 2KHz) test
generator, standard SMPTE-259M.
FA-201AV provides built-in color
bars and de-embedded 2 channel audio
signal (1KHz and 2KHz) test
generator .
|
|
Fiber Optic |
|
Optical fiber
interconnection between
transmitter and receiver |
1 singlemode (SM) cable,
SC connector |
|
Wave length |
1310 nm |
|
Operating Distance
(approx) |
20 km with singlemode
(SM) cables with
FA-201AV and AF-201AV |
|
Transmission power |
-7 dBm, typical |
|
Maximum Receiver
Sensitivity |
-18 dBm, typical |
|
Video |
|
|
Input |
PAL, SECAM,
auto-detected |
|
Output |
PAL (follows vertical
rate) |
|
Decoder type |
Adaptive 2D, digital
comb filter |
|
Video input
(transmitter) |
1 x Component (Y, Pr,
Pb)
1 x S-video
1
x Composite video |
|
Connectors |
3 x BNC |
|
Nominal level |
-1.0 Vp-p for Y in
component video and
S-video and for
composite video
0,525
Vp-p for Pr, Pb in
component video
0.3
Vp-p for C in S-video |
|
Impedance |
75 Ohm |
|
Input coupling |
AC |
|
Video output
(receiver) |
1 x Component (Y, Pr,
Pb) video
1 x S-video
1 x Composite video |
|
Connectors |
3 x BNC |
|
Nominal Level |
-1.0 Vp-p for Y in
component video, S-video
and for composite video
0,525 Vp-p for Pr, Pb in
component video
0.3
Vp-p for C in S-video |
|
Audio |
Frequency response: 20
Hz to 20 kHz, +/-0.5 dB
Audio bits per sample:
20 bits per channel, 2
channels (L, R)
Sampling rate: 48 kHz |
|
Audio input
(transmitter) |
1 Stereo balanced or 2
Mono unbalanced.
Connectors: 5 mm screw
connector, 3 pole
Impedance: 100KOhms
balanced, DC coupled
Nominal level +4 dBu
(1.23 Vrms), 0 dBu =
0.775 Vrms |
|
Audio output (receiver) |
1 Stereo balanced or 2
Mono unbalanced
Connectors: 5 mm screw
connector, 3 pole
Nominal level: +4 dBu
(47Kohm) |
|
Power input requirements |
12 VDC, 1A |
|
Enclosure type |
Aluminium |
|
Dimensions |
40 H x 110 W x 150 D mm |
|
|
