The 4:3 CRT of the
DXF-51 automatically switches between 4:3 and 16:9 aspect ratios, depending on
the active aspect ratio of the connected camera.
Red: A Red
REC (Record) tally is located above and below the viewfinder screen. This
ensures that the operator will not overlook the REC indicator.
Green tally is located above the viewfinder screen, as an alternative for
large White REC tally for the talent is located at the rear of the
20-pin and 8-pin camera connectors. Various controls such as Shutter/Gain LED
indication and 4:3/16:9 switching are possible through 20-pin serial data
transmission. The native 20-pin connector is designed for use with cameras such
as the DXC-D35. An 8-pin cable is supplied for use with conventional Sony
cameras such as the DXC-637 and DXC-327.
Pan and Tilt control is easily adjusted. A Tilt range of +/- 40° and Pan range
of +/-90°. At any tilt angle, the center of gravity does not change, keeping the
camera balance stable.
The DXF-51 is small and lightweight. It's main chassis is constructed of rugged
die-cast aluminum, making the viewfinder body very durable.
Front Panel Controls
On/Off, with attenuation
Controls brightness of image
Adjusts the brightness relation between the subject and background
Signal System :
PAL and NTSC
Display Size :
5" monochrome CRT
Horizontal Resolution :
Power Requirements :
12 V DC
Power Consumption :
202 x 199 x 217
mm (WxHxD), 7.95 x 7.83 x 8.54" (WxHxD)