Audio Technica AE5100 Cardioid Condenser Instrument Microphone

Audio Technica AE5100
Audio Technica AE5100

Audio Technica AE5100 Cardioid Condenser Instrument Microphone

Product Code: AE5100

Buy Sell Sales Audio Technica AE5100


Features
• Large-diaphragm capsule delivers accurate and natural response
• Low-profile design permits innovative placement options
• Cardioid polar pattern reduces pickup of sounds from the sides and rear
• Robust design for enduring dependability on the road
• Includes isolation clamp for shock protection
• Integral 80 Hz HPF switch and 10 dB pad

Cardioid electret microphone offering exceptional sound performance on acoustic instruments. Designed to work at high sound pressure levels, the AE3000 proves indispensable for all percussive instruments. Its large diaphragm element excels with acoustic guitars, guitar amps, toms, overheads, percussion, snare, timpani and other acoustic instruments.

- Compact, discreet, easy to position microphone
- Small (at just 11.5cm), reaching up to 158dB SPL with the pad
- 10dB and 138dB dynamic low-cut filter at a featherweight 170g
- Ideal for acoustic guitar amp, toms, snare, brass and overheads
- Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
- Robust design for enduring dependability on the road
- 80 Hz high Pass Filter and 10 dB pad
- Product designed and manufactured in Japan, guaranteed for 15 years

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 - 20,000 Hz
Open Circuit Sensitivity –43 dB (7.0 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequencey Roll Off 80 Hz, 12 dB/octave
Dynamci Range 137 dB, 1 kHz at Max SPL
Signal to Noise Ratio 83 dB, 1 kHz at 1 Pa
Phantom Power Reqirements 11-52V DC, 3 mA typical
Weight 170 g
Dimensions 4.55" (115.5 mm) long, 1.89" (48.0 mm) maximum diameter
Output Connector Integral 3-pin XLRM-type
Accessories AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch