Audio Technica AE5400 Cardioid Condenser Handheld Microphone
Product Code: AE5400
Features
• Condenser element for pristine sound quality
• Natural and accurate response
• Integral 80 Hz HPF switch and 10 dB pad
• Superior anti-shock engineering for low handling noise
• Multi-stage grille design
• Tough, durable, and resilient steel body
Offering exceptional sound quality, the AE5400 uses the same condenser element as the classic AT4050 studio microphone. This large diaphragm element ensures an accurate,
natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly tailored to suit your voice. With a hardened steel body and grille and multi-stage internal
windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and protection against plosives and sibilance, making it a fantastic on stage microphone. |
| Element |
Externally polarized (DC Bias) condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
20 - 20,000 Hz |
| Open Circuit Sensitivity |
–40 dB (10.0 mV) re 1V at 1 Pa |
| Impedance |
150 ohms |
| Maximum Input Sound Level |
147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal) |
| Low Frequencey Roll Off |
80 Hz, 12 dB/octave |
| Dynamci Range |
133 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
80 dB, 1 kHz at 1 Pa |
| Phantom Power Reqirements |
11-52V DC, 4 mA typical |
| Weight |
330 g |
| Dimensions |
7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
|
