|
DPA d:dicate� MMP-F Modular Active Boom |
|
Product Code:
MMPF
|
|
MMP-F15 |
|
Modular Active Boom, 15cm |
 |
|
|
MMP-F30 |
|
Modular Active Boom, 30cm |
|
|
|
MMP-F45 |
|
Modular Active Boom, 45cm |
|
|
|
MMP-F75 |
|
Modular Active Boom, 75cm |
|
|
|
MMP-F120 |
|
Modular Active Boom, 120cm |
|
|
For podium or stylish floor stand
applications, the MMP-F preamp series is available in different lengths and
gooseneck choices. All equipped with state-of-the-art preamp design and sleek
appearance, they fit any d:dicate modular capsule. Excellent radio frequency
rejection is obtained through the DPA designed impedance balancing with active
drive.
Custom lengths (up to 120cm) and gooseneck choices (top/bottom/both) can be
ordered at a custom fee charge.
Table/Podium Booms
MMP-F15: Modular Active Boom, 15cm Boom, gooseneck entire length
MMP-F30: Modular Active Boom, 30cm Boom, gooseneck top
MMP-F45: Modular Active Boom, 45cm Boom, gooseneck top and bottom
Floor Stand Booms
MMP-F75: Modular Active Boom, 75cm Boom, gooseneck top
MMP-F120: Modular Active Boom, 120cm Boom, gooseneck top |
|
Output
connector: |
XLR-3M. Pin 1: shield, Pin 2:
signal + phase, Pin 3: - phase |
|
Low-cut frequency, -3 dB: |
15
Hz |
|
Noise
with shorted input, A-weighted: |
0.6 µV |
|
Output voltage, RMS: |
2.2
V |
|
Output
voltage, peak: |
3.1 V |
|
Type of electronic circuit: |
Active |
|
THD@1VRMS, 1kHz: |
< 0.2 % |
|
Dynamic range: |
131
dB |
|
Cable drive capability: |
100 m (328
ft) |
|
Output impedance: |
100
ohm |
|
Output balance
principle: |
Impedance balancing |
|
Common Mode
Rejection Ratio (CMRR): |
> 40
dB |
|
Power supply (for full
specifications): |
48 V Phantom power (± 4
V) |
|
Current
consumption: |
3.5 mA |
|
Temperature
range: |
-40 °C to 45 °C (-40
°F to 113 °F) |
|
Color: |
Matte
black |
|
Diameter: |
19 mm (0.75
in) |
|
Length: |
15, 30, 45, 75, 120 cm |
|
Relative Humidity (RH): |
Up to
90% |
|
|
|
|
|
