Audio Technica BP892 Microset Omni Condenser Headworn Microphone

Audio Technica BP892
Audio Technica BP892   

Audio Technica BP892 Microset Omni Condenser Headworn Microphone

Product Code: BP892

Discontinued


Features

  • Offers the ultimate in low-profile, high-performance audio
  • Delivering clear and accurate sound in an inconspicuous package
  • Ultra-lightweight and can be worn for hours without fatigue
  • Protected by a highly durable Parylene coating
  • Extremely intelligible natural audio
  • Comes equipped with AT8464 Dual-Ear Microphone Mount

Audio-Technica’s high-SPL BP892 MicroSet® offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn unit.

The microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by a highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.

Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 20 - 20,000 Hz
Low Frequency Roll-Off 80 Hz, 18 dB/Octave (wired only)
Open Circuit Sensitivity –49 dB (3.5 mV) re 1V at 1 Pa
Impedance 250 ohms (wired only)
Maximum Input Sound Level 135 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 104 dB, 1 kHz at Max SPL (wired only)
Signal to Noise Ratio 63 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2mA typical (wired only)
Switch Flat, roll-off (wired only)
Current Consumption 0.1 mA typical at 5V (wireless only)
Voltage Range 2.5-11V (wireless only)
Weight Microphone, boom & earpiece: 2.6 g (0.09 oz)
Power Module: 85 g (3.0 oz) (wired only)
Dimensions Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
Output Connector 3.5 mm stereo mini-plug on cable
Cable 1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
Accessories AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case