Audio Technica ATND8677 Microphone Desk Stand with Dante™
Product Code: ATND8677
Discontinued
Features
• Connects directly to Dante network via Ethernet cable
• Integrated user switch controls talk/mute in Local mode
• Integrated user switch triggers Dante-enabled devices in Remote mode
• Powered by network PoE
• Scalable across Dante’s 512 bidirectional audio channels
• Touch-sensitive capacitive-type user switch
The ATND8677 is a Dante-enabled microphone desk stand for use with any gooseneck microphone with a three-pin XLRM-type output connector. The desk stand is
designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications. No longer relying on a standalone
Dante audio interface, and benefitting from a switch and an indicator light, the ATND8677 connects directly to the audio network via a standard RJ-45 and a structured wiring port, ensuring
high flexibility during installation and fast relocation. |
| Frequency Response |
20 - 20,000 Hz |
| Impedance |
1.4 k ohms |
| Maximum Input Sound Level |
-10 dBu @ +30 dB gain / -20 dBu @ +40 dB gain / -30 dBu @ +50 dB gain |
| Low Frequency Roll Off |
80 Hz, 18 dB/octave |
| Switches |
Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off;
Low-cut filter: flat, roll-off;
Gain: +30 dB, +40 dB, +50 dB;
Phantom power: 12V DC, off
Remote Mode: Low-cut and Gain via third-party software* |
| Signal-to-Noise Ratio |
68 dB, 1 kHz at 1 Pa |
| Power Requirements |
PoE IEEE802.3af standard |
| Weight |
770 g |
| Dimensions |
133.0 mm maximum length, 93.8 mm maximum width, 46.2 mm maximum height |
| Output Connector |
3-pin XLRF-type
Physical level: standard Ethernet
Dante network:Connector: single RJ45
Cable quality: Shielded CAT5 or CAT6 recommended
Transmission speed: 100 Mbps |
|
|
