Audio Technica ES915C Cardioid Condenser Gooseneck Microphone

Audio Technica ES915C
Audio Technica ES91C

Audio Technica ES915C Cardioid Condenser Gooseneck Microphone

Product Code: ES915C

Audio Technica ES915C
review button

Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform cardioid polar pattern
• Plugs into any standard XLRF-type connector
• Included low-profile isolation mount attenuates noise, shock and vibration

Equipped with Audio-Technica's legendary electro-acoustic design innovations, the ES915C is ideal for applications where quality sound and flexible performance are imperative. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard innovations. The ES915C also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise. The microphone's low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.

Element Fixed-charge back plate, Permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30 - 20,000 Hz
Open Circuit Sensitivity -40dB (10.0 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 db/octave
Switches Flat, roll-off
Dynamic Range 109 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4 mA typical
Weight ES915C12 125 g, ES915C18 135 g, ES915C21 140 g, ES915C24 145 g
Dimensions Length - ES915C12 304.8 mm, ES915C18 457.2 mm, ES915C21: 533.4 mm, ES915C24 609.6mm
Head diameter 8.4 mm (all models),
Base diameter 18.9 mm (all models)
Output Connector (Power module) Integral 3-pin XLRM-type
Accessories Included AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8"-27 to 3/8"-16 threaded adapter