Audio Technica ES915ML MicroLine Condenser Gooseneck Microphone

Audio Technica ES915ML
Audio Technica ES915ML Audio Technica ES915ML

Audio Technica ES915ML MicroLine Condenser Gooseneck Microphone

Product Code: ES915ML
Audio-Technica ES915ML

review button

Features
• Designed for professional recording and demanding sound pickup applications
• Low-profile element provides uniform MicroLine polar pattern
• Plugs into any standard XLRF-type connector
• Included low-profile isolation mount attenuates noise, shock and vibration

Equipped with Audio-Technica's legendary electro-acoustic design innovations, the ES915ML is ideal for applications where quality sound and flexible performance are imperative. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES915ML also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone's low-profile element provides a uniform MicroLine polar pattern with 90º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.

Element Fixed-charge back plate, Permanently polarized condenser
Polar Pattern MicroLine
Frequency Response 30 - 20,000 Hz
Open Circuit Sensitivity -35dB (17.7 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 133 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 db/octave
Switches Flat, roll-off
Dynamic Range 109 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4 mA typical
Weight ES915ML12 129 g, ES915ML18 139 g, ES915ML21 144 g, ES915ML24 149 g
Dimensions Length - ES915ML12 423.8 mm, ES915H18 576.2 mm, ES915ML21: 652.4 mm, ES915ML24 728.6mm
Head diameter 8.0 mm (all models),
Base diameter 18.9 mm (all models)
Output Connector (Power module) Integral 3-pin XLRM-type
Accessories Included AT8138 MicroLine foam windscreen, AT8474 universal isolation mount, AT8473 quick-mount stand adaptor, 5/8"-27 to 3/8"-16 threaded adaptor