|
Audio-Technica’s System 10 PRO
Rack-Mount digital wireless system
provides the same interference-free
operation in the 2.4 GHz range
(outside TV bands) as the original
System 10 wireless system but with
expanded features and versatility.
The durable half-rack chassis is
equipped to house two receiver units
that can be operated locally or
released from the chassis and
mounted remotely (up to 328 feet
away) via Ethernet cable. Up to five
chassis (10 receiver units) can be
linked using the RJ12 cable included
with each system, creating a stable,
multichannel system with the
simultaneous use of up to 10
channels.
Like all the
products in the System 10 wireless
family, the PRO Rack-Mount features
24-bit operation, easy setup, clear,
natural sound quality, and three
levels of diversity assurance:
frequency, time, and space.
Frequency Diversity sends the signal
on two dynamically allocated
frequencies for interference-free
communication. Time Diversity sends
the signal in multiple time slots to
maximize immunity to multipath
interference. Space Diversity uses
two antennas on each transmitter and
receiver unit to maximize signal
integrity.
Each System 10
PRO Rack-Mount system includes an
ATW-RC13 receiver chassis with
rack-mount adapters, one or two
ATW-RU13 receiver units with
corresponding AT8690 receiver unit
mounting brackets, a joining plate
(for dual-channel systems only), one
RJ12 cable, one AC adapter, and one
or two ATW-T1001 UniPak® body-pack
or ATW-T1002 handheld transmitters,
or one of each. Both the receiver
chassis and transmitters feature
easy-to-read displays.
The
ATW-T1006 Boundary
Microphone/Transmitter and the
ATW-T1007 Microphone Desk Stand
Transmitter can be paired with any
System 10 or System 10 PRO digital
wireless receiver and are available
separately.
|
|
- Digital 24-bit/48 kHz wireless
operation for ultimate sound quality
and dependable performance
-
Operates in the 2.4 GHz range –
completely free from TV interference
- Receiver units can be docked in
the chassis or mounted remotely (up
to 328 feet away) via Ethernet cable
for added -versatility
- Up to
five chassis (ten receiver units)
can be linked and used
simultaneously
- Each receiver
unit can be paired with up to 10
transmitters, allowing users to
instantly switch between different
transmitter configurations
-
Chassis’ System ID Display shows RF
signal level, system ID, transmitter
battery level, and system link
status
- Automatic frequency
selection for seamless,
interference-free operation
-
Extremely easy operation with
instantaneous channel selection,
sync, and setup
- Three levels of
diversity assurance: frequency, time
& space
- Ground-lift switch
helps eliminate audible hum caused
by ground loops
- The ATW-T1006
Boundary Microphone/Transmitter and
the ATW-T1007 Microphone Desk Stand
Transmitter can be paired with any
System 10 or System 10 PRO digital
wireless receiver and are available
separately
|
|
Overall System
Specifications |
|
Operating Frequencies |
2.4 GHz ISM Band |
|
Dynamic Range |
> 109 dB (A-weighted),
typical |
|
Total Harmonic
Distortion |
< 0.05% typical |
|
Operating Range
|
60m (200') typical |
|
Operating Temperature
Range |
0° C to +40° C (32° F to
104° F)
Battery
performance may be
reduced at very low
temperatures |
|
Frequency Response |
20 Hz to 20 kHz
Depending on microphone
type |
|
Receiver
Specifications |
|
Receiving System
|
Diversity
(frequency/time/space) |
|
Output Connectors |
Remote Receiver
Connector: RJ45
Link
Connector: RJ12 |
|
Maximum Output Level |
XLR, balanced: 0 dBV
1/4" (6.3 mm),
unbalanced: +6 dBV |
|
Power Supply |
100-240V AC (50/60 Hz)
to 12V DC .5A (center
positive) switched mode
external power supply |
|
Dimensions
|
209.8 mm (8.26") W x 44
mm (1.73") H x 169.3 mm
(6.67") D |
|
Net Weight
|
940 g (33.2 oz) |
|
Accessories Included |
Power Supply, AC
adapter, Link cable,
Rack-mount adapters,
Joining plate, Rubber
feet |
|
Body-pack
Transmitter
Specifications |
|
RF Power Output |
10 mW |
|
Spurious Emissions
|
Under federal
regulations |
|
Input Connections
|
Four-pin Locking
Connector
Pin 1: GND
Pin 2: INST INPUT
Pin
3: MIC INPUT
Pin 4:
DC BIAS +5V |
|
Batteries |
Two 1.5V AA alkaline
(not included) |
|
Battery Life
|
> 7 hours
depending on battery
type and use pattern |
|
Dimensions
|
70.2 mm (2.76") W x
107.0 mm (4.21") H x
24.9 mm (0.98") D |
|
Net Weight |
3.5 oz (100 g), without
batteries |
|
Handheld
Transmitter
Specifications |
|
RF Power Output
|
10 mW |
|
Spurious Emissions |
Under federal
regulations |
|
Batteries |
Two 1.5V AA alkaline
(not included) |
|
Battery Life
|
>7 hours
(alkaline),
depending on battery
type and use pattern |
|
Dimensions |
254.8 mm
(10.03") long, 50.0 mm
(1.97") diameter |
|
Net Weight
|
280 g (9.9
oz), without batteries |
|
Accessory Included
|
AT8456a Quiet-Flex™
stand clamp |
|
 |
 |
 |
 |
|
|
|
ATW 1311 |
ATW 1312 |
ATW 1322 |
|
ATW-RC13
Rack-mount
receiver
chassis,
ATW-RU13x2
receiver unit
and ATW-T1001
UniPak®
transmitter x2.
Select a
Wireless
Essentials®
microphone or
cable to
complete the
system. |
|
|
ATW-RC13
Rack-mount
receiver
chassis,
ATW-RU13x2
receiver unit,
ATW-T1002
handheld dynamic
unidirectional
microphone/transmitter
and ATW-T1001
UniPak®
transmitter.
Select a
Wireless
Essentials®
microphone or
cable to
complete the
system. |
|
|
ATW-RC13
Rack-mount
receiver
chassis,
ATW-RU13x2
receiver unit
and ATW-T1002 x2
handheld dynamic
unidirectional
microphone/transmitter. |
|
|
|
