Home

Beyerdynamic -
Headsets for Intercom
DT 287 V.11 MK II, with built-in pre-amplifier

Azden  |   Beyerdynamic  |   Zoom  |   Mackie  |   Yamaha  |   Steinberg  |   JBL  |   Sound Devices  |   SHURE  |   Sennheiser  |   Tascam  |   Data video  |    Visit Us 19
<Home < Beyerdynamic < Headsets for Intercom < DT 287 V.11 MK II

Headsets for Intercom

DT 790
DT 290 MK II
DT 280 MK II
DT 234 PRO
DT 190
DT 109
DT 108
DT 297 V.11 MK II,
with built-in pre-amplifier
DT 287 V.11 MK II,
with built-in pre-amplifie
r
DT 280 V.11 MK II,
with built-in pre-amplifier
DT 290 V.11 MK II,
with built-in pre-amplifier

Headphones for Intercom

DT 1350
DT 250
DT 252
DT 231 PRO
DT 150
DT 100
DT 102

Headsets for Moderators & Commentators

DT 797 PV, for phantom power
DT 297 PV MK II, for phantom power
DT 287 PV MK II, for phantom power
DT 291 PV MK II, for phantom power
DT 190
DT 790
DT 290 MK II
DT 280 MK II
DT 109
DT 108

Headphones for Moderators & Commentators

DT 1350
DT 770 PRO
DT 250
DT 252
DT 990 PRO
DT 150
DT 770 M
DT 100
DT 102

Monitoring Headphones

Headzone PRO XT v2.1.1
DT 1350
DT 770 PRO
Headzone PRO v2.1.1
DT 48 E
DT 770 M
DT 250
DT 252
DT 150
DT 231 PRO
DT 100
DT 102

Intercom Headset DT 287 V.11 MK II, with built-in pre-amplifier



Model: DT 287 V.11 MK II, with built-in pre-amplifier

Single-ear headset with condenser microphone for television cameras with T-power for carbon mics only.
The headsets in this series dispose of a dynamic headphone transducer with a frequency response of 10 – 30,000 Hz and excellent isolation from ambient noise. The single cable is detachable, the ear cushions are replaceable. The pivoting gooseneck microphone- boom design, can be swivelled to work on the left or right side of the headset, or set to the upper position when not in use.

Features
▲ NEW - Improvement of immunity against RFI (Radio Frequency Interference) caused by GSM, DECT, UMTS, Tetra etc.
▲ Good ambient noise attenuation
▲ High-quality condenser cardioid microphone for improved bass response and high gain-before-feedback
▲ Very high speech reproduction quality and excellent intelligibility
▲ NEW - Flexible, pivotable gooseneck for optimal positioning with elastical microphone suspension
▲ Lightweight, low profile design
▲ Single-sided, detachable cable
▲ Powerful neodymium headphone system for excellent reproduction accuracy
▲ Optimised frequency response according to IRT (Institute for Radiotechnology in Munich) regulations
▲ Balanced sound impression
▲ Closed headphone
▲ Internal preamp delivers carbon mic output level, for phantom powering, please choose the non-V.11 version
▲ Circumaural ear pads, advanced ear cushion system
▲ Adjustable, soft padded headband
▲ Service-friendly construction due to exchangeablitity of all parts

All DT 287 versions are supplied without connecting cable. Please order the appropriate connecting cable separately.


Technical Specifications

Product code: DT287 V.11 MKII

Transmission type   Wired
Headphone design (operating principle)   Closed
Headphone impedance   80 ohms
Headphone frequency response   10 - 30.000 Hz
Nominal sound pressure level   100 dB SPL
Polar pattern for microphone   Cardioid
Transducer type  for microphone   Condenser
Construction   Circumaural (around the ear)
Cable & plug   Detachable cable – various connectors available
Net weight without packaging   170 g


 
 
   

Read our blogs