Clear Com Singapore

WBS-670

Clear-Com WBS UHF Base Station

Clear-Com WBS-670

Read our blog, or visit our new site
Home > Clear-Com > Wireless > WBS UHF Intercom > WBS-670  
 Clear-Com WBS-670 UHF band, single-channel wireless base station

Clear-Com WBS-670
Product Code: WBS670
Buy Sell Sales Clear-Com WBS-670

review button


The WBS-670 1RU, rack-mountable base station supports up to four full-duplex wireless beltpack. The base station features a full talk/listen headset so an additional person could communicate with the intercom channel while at the base. Rear panel connections allow multiple base station/beltpack systems to operate as one large system.
Specifications of WBS670
 

Base Station

RF Frequency Range: 518-608 MHz, 614-686 MHz in 18 MHz TX and RX bands
 
WBS-670: G9 band, 796-814 MHz Tx, Germany only
 
Power Requirement: 100-240 VAC, 50-60 Hz, IEC receptacle
 
Typical Battery Life Alkaline: N/A
 
Typical Battery Life - Nickel Metal Hydride (1500 mAh): N/A

 
Current Draw: N/A
 
Temperature Range: -4oF to 140oF (20oC to 55oC)
 
Dimensions: 19.0” W x 1.72” H x 14.0” D (48.3 cm x 4.4 cm x 35.6 cm)
 
Weight: 6 lbs. 15 oz. (3.15 kg)
 
Transmit Antenna: 1/2 Wave (supplied), TNC Male Connector
 
Receiver Antenna: 1/2 Wave (supplied), TNC Male Connector
 
FCC ID: B5DM514
 
Frequency Response: 300 Hz - 8,000 Hz
 
Four-Wire Input: Level Adjustable (2 Vrms typical)
 
Four-Wire Output: Level Adjustable (2 Vrms typical)
 
Clear-Com® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 200 W
 
RTS® Party-line Levels: Input/Output Level Adjustable (0.775 Vrms typical), Line Impedance 200 W
 
Telex® Party-line Levels: Input/Output Level Adjustable (1 Vrms typical), Line Impedance 300 W
 
Auxiliary Input: Adjustable (2 Vrms typical)
 
Auliliary Output: Adjustable (2 Vrms typical into 600 W) (at rated deviation)
 
 
TRANSMITTER
Type: Synthesized, 720 channels
 
Transmit Power: 50 mW max. (High), 5 mW (normal)
 
RF Frequency Stability: 0.005%
 
Modulation: FM, 40 KHz Deviation
 
Modulation Limiter: Peak-Responding Compressor
 
Modulation Frequency Range: 300 Hz -8,000 Hz +-2 dB
 
Microphone Audio Input: 30 W - 3,500 W
 
Microphone Input Sensitivity: 9 mV
 
Radiated Harmonics & Spurious: Exceeds FCC specifications
 
FCC Acceptance: Type accepted under FCC Part 74
 
 
RECEIVER
Type: Dual Conversion Superheterodyne, Synthesized, FM, 720 channels
 
RF Sensitivity: <0.7 mV for 12 dB SINAD
 
Signal-to-Noise Ratio: 95 dB
 
IF Selectivity: 3 dB at 230 KHz
 
Image Rejection: 70 dB or better
 
Squelch Quieting: 95 dB
 
RF Frequency Stability: 0.005%
 
Distortion: <1% at full deviation
 
Local Headset Output: 40mW output into 600 W (1% distortion)
 
FCC Acceptance: Notification under FCC Part 15
 

 

Clear-Com

Wired Intercom

Wireless Intercom

Base Stations

FSE BASE
MB-100
MB340ES
BS-121
BS-210
BS-410

Beltpacks

FSE-BP50
FSII-BP19
FSII-BP24
FSII-BP19-O2
FSII-BP24-O2
BP-200
BP-210
BP-340
BP-410

Headsets

WH220

WH340
WH410

System Sets

HME DX100

HME DX121
HME DX210
HME DX410

Splitter & Transceiver

FSII-SPL
FSII-TCVR-19
FSII-TCVR-IP-19
Intercom Headsets
Intercom Microphones

Accessories

email us

Contact us