|
Element
|
Fixed-charge back plate,
permanently polarized
condenser |
| Polar Pattern |
X/Y Stereo |
|
Frequency Response
|
20 - 15,000 Hz |
| Low Frequency Roll-off |
80
Hz,
12 dB/octace |
|
Open Circuit Sensitivity
|
Phantom: –38 dB (12.5
mV) re 1V at 1 Pa
Battery: –38 dB (12.5
mV) re 1V at 1 Pa
|
|
Channel Balance |
< 2.5 dB |
|
Impedance
|
Phantom: 250 ohms
Battery: 300 ohms |
| Maximum Input Sound
Level |
Phantom: 250 ohms
Battery: 300 ohms |
| Dynamic Range |
Phantom: 109 dB , 1 kHz
at Max SPL
Battery:
101 dB, 1 kHz at Max SPL
|
| Signal-to-Noise Ratio |
75 dB, 1 kHz at
1 Pa;
|
| Phantom Power
Requirements |
11-52V DC,
2 mA typical (each
channel) |
|
Battery Type |
1.5V AA/UM3 |
|
Battery Life |
0.7 mA / 700 hours
typical (alkaline) |
| Switch |
Battery On/Off; Flat,
roll-off; |
|
Weight
|
247 g |
|
Dimensions
|
186.0 mm (7.32") long,
47.6 mm (1.87") maximum
head diameter, 21.0 mm
(0.83") body diameter |
|
Output Connector
|
Integral
5-pin XLRM-type |
| Cable |
Balanced: 2.0 m (6.5')
long, 8 conductor,
shielded, vinyl-jacketed
stereo cable with 5-pin
XLRF-type connector at
microphone end and two
3-pin XLRM-type
connectors at output
end; Unbalanced: 0.6 m
(2.0') long stereo cable
with 5-pin XLRF-type
connector at microphone
end and 3.5 mm TRS
connector at output end |
| Accessories |
AT8405a stand clamp for
5/8"-27 threaded stands;
windscreen; battery;
soft protective pouch |
