|
Ideal for general audio
acquisition such as interviews,
acoustic guitar, percussion,
overheads, vocals and more, the
AT8033 features high-SPL
capability and wide frequency
response. Its cardioid polar
pattern reduces pickup of sounds
from the sides and rear,
improving isolation of desired
sound source. The mic excels in
both studio and stage
applications. It operates on
battery or phantom power.
|
|
Element
|
Fixed-charge back plate
permanently polarized
condenser |
|
Polar Pattern |
Cardioid |
|
Frequency Response
|
30 - 20,000 Hz |
|
Low Frequency Roll-Off |
80 Hz, 12 dB/Octave |
|
Open Circuit Sensitivity
|
Phantom: –44 dB (6.3 mV0)
re 1V at 1 Pa
Battery: –45 dB (5.6 mV)
re 1V at 1 Pa
|
|
Impedance
|
Phantom: 250 ohms
Battery: 300 ohms |
|
Maximum Input Sound
Level |
Phantom: 137 dB SPL, 1
kHz at 1% T.H.D.
Battery: 123 dB SPL, 1
kHz at 1% T.H.D. |
|
Dynamic Range |
Phantom: 113 dB, 1 kHz
at Max SPL
Battery:
99 dB, 1 kHz at Max SPL |
|
Signal to Noise Ratio |
70 dB, 1 kHz at 1 Pa |
|
Phantom Power
Requirements |
11-52V DC, 2 mA typical |
|
Battery Type |
1.5V AA/UM3 |
|
Battery Life |
0.4 mA / 1200 hours
typical (alkaline) |
|
Switch |
Flat, Roll-off |
|
Weight
|
159 g |
|
Dimensions
|
194.2 mm (7.65") long,
26.0 mm (1.02") head
diameter |
|
Output Connector
|
Integral 3-pin XLRM-type |
|
Accessories |
AT8405a stand clamp for
5/8"-27 threaded stands;
5/8"-27 to 3/8"-16
threaded adapter; AT8136
windscreen; battery;
soft protective pouch |
|
|
