| DPA d:dicate™ 4017E Shotgun Microphone,
Active Cable |
|
Product Code:
4017E
|
|
4017-ER |
|
Shotgun Microphone, Rear
Cable |
 |
| |
4017-ES |
|
Shotgun Microphone, Side
Cable |
|
|
• Sleek shotgun for distant
miking
• Short and lightweight
• Integrated active cable
• Highly directional
With our most tiny pre-amp design, the 4017E features an integrated
cable solution with either side (4017ES) or rear (4017ER) cable
entry. Being the shortest professional interference tube shotgun
mic available today, the 4017E will with its only 12,5 cm length
and 30 g capsule weight (121 g in total with 3 m cable and
connector) be able to boom actors or capture distant voice dialogue
for broadcast and video situations.
The SM4000 suspension mount is included in the package, allowing
the 4017E to be hung from the ceiling and create precision spot
miking of orchestra sections or ambience atmosphere.
At any time and with no tools necessary it is possible to transform
the basic 4017E microphone into a new configuration by combining it
with another DPA microphone capsule or preamp. |
| Directional
pattern: |
Supercardioid,
lobe-shaped |
| Principle of
operation: |
Pressure gradient, with
interference tube |
| Cartridge
Type: |
Pre-polarized
condenser |
| Frequency
range: |
20 Hz to 20
kHz |
| Frequency range,
± 2 dB: |
40 Hz - 18 kHz with
typ. 3 dB soft boost at 15 kHz |
| Sensitivity,
nominal, ± 2 dB at 1 kHz: |
19 mV/Pa; -34.4 dB re. 1
V/Pa |
| Equivalent noise
level, A-weighted: |
Typ. 13 dB(A) re. 20
µPa (max. 15 dB(A)) |
| Equivalent noise
level, ITU-R BS.468-4: |
Typ. 24 dB (max. 26
dB) |
| S/N ratio
(A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 81
dB(A) |
| Total Harmonic
Distortion (THD) at 1 kHz: |
< 1 % up to 137 dB
SPL peak |
| Dynamic
range: |
Typ. 124
dB |
| Max. SPL, peak
before clipping: |
138
dB |
| Output
impedance: |
100
ohm |
| Minimum load
impedance: |
2 kΩ |
| Cable drive capability: |
100
m (328 ft) |
| Output balance
principle: |
Impedance
balancing |
| Common Mode
Rejection Ratio (CMRR): |
> 40
dB |
| Power supply
(for full specifications): |
48 V Phantom power
(± 4 V) |
| Current
consumption: |
3.5 mA |
| Color: |
Matte
black |
| Weight: |
121 g (4.3 oz) |
| Diameter: |
19 mm (0.75
in) |
| Capsule
diameter: |
19 mm (0.75 in) |
| Output voltage,
RMS: |
2.2 V |
| Microphone
Length: |
125 mm (4.9 in) |
| Polarity: |
+V at Pin 2 for
positive sound pressure |
| Connector: |
XLR-3M. Pin 1: shield,
Pin 2: signal + phase, Pin 3: - phase |
|
Relative Humidity (RH): |
Up to
90% |
| Temperature
range: |
-40 °C to 45
°C (-40 °F to 113 °F) |
|
|
|
|
|
