| Clear-Com BS-200 Base Station |
Product Code:BS200
|
| Highlights of BS-200 |
·
2.4 GHz license-free operation: Approved for worldwide use -no need to
coordinate frequency operation with other wireless systems.
·
Secure Communication: Digital Frequency Hopping Spread Spectrum with encrypted signals secures communication so people outside the system can't hear your conversations.
·
Triple Diversity: Provides the strongest signal possible for clear, seamless and uninterrupted conversations
·
Flexible Battery-Powered Operation: The BS200 Base Station operates on either the supplied AC Adapter or an external
DC source such as a vehicle electrical system for rack mounting in an ENG van.
·
Expandable system: enables up to eight base stations to be used together for a total of 120 COMMUNICATORs with up to 32 in hands-free, full-duplex mode.
· Remotely “unlatch” COMMUNICATORs
: from transmitting at the base to stop a rogue COMMUNICATOR that’s been left transmitting without having to locate the beltpack.
·
Wireless ISO:allows all mobile users on the same base station to converse with each other isolated from the two- or four-wire intercom channel
which can be restricted to specific users.
·
Wired intercom interface: supports one hardwired intercom channel using two-wire, four-wire, or both simultaneously. The base is compatible with RTS
and ClearCom/Production Intercom two-wire intercom systems. ISO+ mode gives you an additional four-wire intercom interface by using the AUX IN and AUX OUT connections.
· Headset connector: allows the stationary base station operator direct access to
the IC channel, AUX IN/OUT, as well as COMMUNICATOR®s. An optional six-foot extension cable provides added mobility.
|
| Specifications of BS-200 |
| TX & RX Antenna: |
½-Wave, Dual Diversity Dipole
|
| 4-Wire I/O: |
RJ-45, 600Ω Balanced, Level Adjustable, Simultaneous Operation with 2-Wire
|
| 2-Wire I/O: |
XLR-3F & 3M, Externally-Switchable RTS or ClearCom Mode, 200Ω, Null Adjustable
|
| Auxiliary Input: |
XLR-3F/¼” Phone Combo Jack, 600Ω Balanced, Level Adjustable
|
| Auxiliary Output: |
XLR-3M, 600Ω Balanced, Level Adjustable
|
| Headset Connector: |
4-Pin Mini-DIN
|
| Headset Output: |
250 mW into 32Ω
|
| Size: |
19” x 1.72” x 13.50” (1-RU), (48.26 cm x 4.37 cm x 34.29 cm)
|
| Weight: |
9.2 lb (4.17 kg)
|
| Power Requirements: |
100-240 VAC, 50-60 Hz or 12-14 VDC
|
|
|
|
|
