Audio Technica AT2010 Cardioid Condenser Microphone
Product Code: AT2010
Features
• Same 16mm low-mass diaphragm found in AT2020 studio microphone
• High SPL-handling and wide dynamic range
• Cardioid polar pattern reduces pickup of sounds from the sides and rear
• Multi-stage grille design offers excellent protection
• Quiet-Flex stand clamp provides silent, flexible microphone positioning
• Rugged, all-metal and construction for years of trouble-free service
The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the
stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio
condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
|
| Element Condenser |
Polar Pattern Cardioid |
| Frequency Response |
40 - 20,000 Hz |
| Open Circuit Sensitivity |
-48 dB (3.9 mV) re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
136 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range |
113 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
71 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
48V DC, 2 mA typical |
| Weight |
233g |
| Dimensions |
179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
|
