Audio Technica AT2050 Multi-Pattern Condenser Microphone
Product Code: AT2050
Features
• Three switchable polar patterns
• Switchable 80 Hz high-pass filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics
• Includes shock mount & protective pouch
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large
diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for
studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. |
| Element |
Externally-polarized (DC bias) condenser |
| Polar Pattern |
Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern |
| Frequency Response |
20 - 20,000 Hz |
| Open Circuit Sensitivity |
-42 dB (7.9 mV) re 1V at 1 Pa |
| Impedance |
120 ohms |
| Maximum Input Sound Level |
149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Low Frequency Roll Off |
80 Hz, 12 dB/octave |
| Dynamic Range |
136 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
11-52 V DC, 4.7 mA typical |
| Weight |
412 g |
| Dimensions |
170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
|
|
