Audio Technica AT4060 Cardioid Condenser Tube Microphone
Product Code: AT4060
Features
• Vintage tube sound with the versatile performance necessary for the most demanding studio applications
• Wide dynamic range, low self-noise and high max SPL capability
• Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Audio-Technica’s AT4060 cardioid vacuum tube condenser brings the warmth of vintage tube sound to every shade of the SPL spectrum. With a dynamic range that far
exceeds that of other tube microphones, it as easily captures the subtlest nuances of vocal and instrumental performance as it handles guitar cabinets and other extreme SPL environments. Featuring
hand-selected, individually tested and aged tubes, the AT4060 achieves the coveted, classic sound of valve design without compromising the specification standards required for the most demanding recording
situations.
Audio-Technica takes no chances with this microphone’s consistency and reliability: every AT4060 is individually tested and inspected for 100 percent quality assurance—rare
in today’s world of mass-marketed studio microphones.
AT4060. Vintage sound, rock-solid reliability and amazing versatility for studio and live performance. From
Audio-Technica’s premium line of 40 Series condenser microphones. |
| Element |
Externally polarized (DC bias) capacitor |
| Polar Pattern |
Cardioid |
| Frequency Response |
20 - 20,000 Hz |
| Open Circuit Sensitivity |
-34 dB (19.9 mV) re 1V at 1 Pa |
| Impedance |
200 ohms |
| Maximum Input Sound Level |
150 dB SPL, 1 kHz at 1% T.H.D.; 149 dB SPL, with 10 dB pad (nominal) |
| Noise |
19 dB SPL |
| Dynamic Range |
131 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
75 dB, 1 kHz at 1 Pa |
| Power Requirements |
AT8560 power supply (120V/230V AC) |
| Weight |
127 g |
| Dimensions |
Microphone: 8.27" (210.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Power Supply: 8.27" (210.0 mm) W x 8.86" (225.0 mm) D x
1.73" (44.0 mm) H |
| Output Connector |
XLRM-type (on power supply) |
| Cables |
32.8' (10 m) cable with 6 pin XLR-type connectors for use between microphone and power supply; AC power supply cable |
| Accessories |
AT8560 power supply; AT8447 shock mount for 5/8"-27 threaded stands; rack-mount adapters for power supply; protective mic carrying case |
|
|
