Audio Technica AT4047/SV Cardioid Condenser Microphone
Product Code: AT4047/SV
Features
• Technically-advanced large diaphragm
• Externally polarized (DC bias) true condenser design
• Exceptionally low noise, wide dynamic range and high-SPL capability
• Transformerless circuitry virtually eliminates low-frequency distortion
• Precision-machined, nickel-plated brass, acoustic element baffle
• Custom shock mount provides superior isolation
The rich, warm sound takes you back to the classic F.E.T. studio microphones. But there’s nothing remotely old-fashioned about the technology behind that vintage
sound. The AT4047/SV studio condenser’s dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range. With a wide dynamic range, incredibly
low self-noise and high SPL capability, this versatile microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups and voiceovers. |
| Element |
Externally-polarized (DC bias) condenser |
| Polar Pattern |
Cardioid |
| Frequency Response |
20 - 18,000 Hz |
| Low Frequency Roll-Off |
80 Hz, 12 dB/octave |
| Open Circuit Sensitivity |
-35 dB (17.7 mV) re 1V at 1 Pa |
| Impedance |
250 ohms |
| Maximum Input Sound Level |
149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Noise |
9 dB SPL |
| Dynamic Range |
140 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
85 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
48 V DC, 3.0 mA typical |
| Switches |
Flat, Roll-off |
| Weight |
410 g |
| Dimensions |
6.69" (170.0 mm) long,
2.10" (53.4 mm) maximum body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case |
|
|
