Audio Technica AT4050 Multi-Pattern Condenser Microphone
Product Code: AT4050
Features
• Innovative side-address Mid-Side stereo microphone
• Engineered for professional recording, broadcast and sound reinforcement
• Independent cardioid and figure-of-eight condenser elements
• Switch selection of Mid-Side mode and two internally matrixed stereo modes
• Dual-diaphragm capsules
Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable
combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent,
outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. |
| Element |
Externally-polarized (DC bias) condenser |
| Polar Pattern |
Cardioid, Omnidirectional, Figure-of-Eight |
| Frequency Response |
20 - 18,000 Hz |
| Low Frequency Roll-Off |
80 Hz, 12 dB/octave |
| Open Circuit Sensitivity |
-36 dB (15.8 mV) re 1V at 1 Pa |
| Impedance |
100 ohms |
| Maximum Input Sound Level |
149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Noise |
17 dB SPL |
| Dynamic Range |
132 dB, 1 kHz at Max SPL |
| Signal to Noise Ratio |
77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements |
48 V DC, 4.2 mA typical |
| Switches |
Polar selection; Flat, roll-off; 10 dB pad (nominal) |
| Weight |
510 g |
| Dimensions |
7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter |
| Output Connector |
Integral 3-pin XLRM-type |
| Accessories |
AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case |
|
|
